IMPORTANT SAFETY INSTRUCTIONS Verify Line Voltage Before Use The JBL Bar 1300X (soundbar, detachable speakers and subwoofer) has been designed for use with 100-240V AC, 50/60Hz. Connection to a line voltage other than that for which your product is intended can create a safety and fire hazard and may damage the unit.
1. INTRODUCTION Thank you for purchasing the JBL Bar 1300X (soundbar, detachable speakers and subwoofer) which is designed to bring an extraordinary sound experience to your home entertainment system. We encourage you to take a few minutes to read through this manual, which describes the product and includes step-by- step instructions for setting up and getting started.
HDMI cable (1.2 m/3.9 ft.) 2. WHAT’S IN THE BOX Unpack the box carefully and ensure that the following parts are included. If any part is damaged or missing, do not use it and contact your retailer or customer service representative. Soundbar Side caps Subwoofer...
3.1.2 Rear connectors 3. PRODUCT OVERVIEW 3.1 Soundbar 3.1.1 Controls 1) POWER • Connect to power (with the supplied power cord) 2) USB • USB connector for software update (Source) 3) ETHERNET • Switch on • Connect to your home network through an Ethernet cable •...
• In the Bluetooth mode, press to enter the Bluetooth 3.3 Subwoofer pairing mode • In the Bluetooth mode, press and hold for more than 5 seconds to enter the Bluetooth Stereo pairing mode (to connect to the other detachable speaker and set up a Bluetooth stereo system) (soundbar mode) •...
3.4 Remote control (available when both of the detachable rear speakers are undocked from the soundbar) • Select the surround sound level for rear speakers: middle (default), high, muted or low 4) CALIBR Press to start sound calibration • (Moment) •...
4.2 Wall-mounting 4. PLACE Wall-mount the soundbar and detachable rear speakers together 4.1 Desktop placement or separately. Place the soundbar, detachable speakers and subwoofer on a 4.2.1 Wall-mount the soundbar flat and stable surface. Refer to the recommended distance in the following diagram.
4.2.2 Wall-mount the detachable speakers as rear 5. CONNECT surround speakers 5.1 Connection with your TV and digital devices For audio playback through the soundbar, connect the soundbar with your TV through the supplied HDMI cable or an optical cable (sold separately).
Page 11
1. Connect the soundbar with the HDMI IN (ARC / eARC) 5.1.2 TV (HDMI eARC) connector on your TV by using the supplied HDMI cable. • On your TV, check that HDMI-CEC and HDMI ARC / eARC have been enabled. Refer to the owner’s manual of your TV for more information.
5.1.3 OPTICAL NOTES: – * The HDMI cable (for digital device connection) and the optical cable are sold separately. – Full compatibility with all HDMI-CEC devices is not guaranteed. – When both HDMI ARC and optical cables are connected to the soundbar for audio input from TV connection, the HDMI ARC OPTICAL connection is prioritized.
5.2.3 To connect to another Bluetooth device < 10 m / 33 ft SETUP WIFI 1. In the Bluetooth source, press and hold on the soundbar JBL One on the remote control until “BT PAIRING” is displayed. J The soundbar enters the Bluetooth pairing mode. 2.
6.2 Charge the detachable speakers 6. SETUP When the detachable surround speakers are out of battery, their 6.1 Connect the detachable rear speakers and wireless connection with the soundbar will be lost. subwoofer The first time you use the two detachable speakers, charge them for about 4 hours to ensure sufficient battery power.
6.2.2 Charge through a USB cable 1) Calibrate the listening zone 100% USB-C • Use a USB-C cable to connect the detachable speakers to power respectively. • For the detachable speakers, the status indicator is used for status indication of both battery power and wireless connection (See “3.2 Detachable speakers”).
Page 16
2) Calibrate the speaker position 3. Rotate for the best listening experience. NOTES: – During sound calibration, all buttons on the remote control are disabled except for and CALIBR. 6.3.2 Dolby Atmos / DTS:X ® ® With Dolby Atmos or DTS:X, overhead audio distribution is provided for powerful 3D sound immersion.
1. Check that the soundbar and the detachable rear speakers 6.4 Use the detachable speakers as standalone are connected wirelessly (See “6.1 Connect the detachable Bluetooth speakers rear speakers and subwoofer”). For music playback, you can set up the detachable rear speakers 2.
Page 18
6.4.2 Standalone Bluetooth stereo system To break the Bluetooth Stereo link between the two By connecting the two detachable speakers, you can set up a speakers stereo music system with L (left) and R (right) channels. L / R < 10 m / 33 ft •...
7.2 Play from the TV source 7. PLAY With the soundbar connected, you can enjoy TV audio from the 7.1 Power-on/Auto standby/Auto wakeup soundbar speakers. HDMI eARC/ HDMI ARC OPTICAL HELLO 7.1.1 Switch on 1. Make sure that your TV is set to support external speakers •...
7.4 Play from the Bluetooth source 2. Point your TV remote control at the soundbar. Follow the screen instructions to operate the buttons on your TV remote Through Bluetooth, stream audio play on your Bluetooth device control: to the soundbar. •...
“6.4 Use the detachable speakers as standalone Bluetooth Access your presets with the Moment button speakers” for the information about setup and playback. By pressing on the remote control, you can access the playlist and speaker settings that you have personalized on the JBL One app.
7.6 Play through Chromecast built-in 7.7 Play through AirPlay Through Chromecast built-in, stream audio on your Android or Through AirPlay, stream audio on your iOS device to the soundbar. iOS device to the soundbar. 1. On the soundbar, 1. On the soundbar, •...
3. Launch the Amazon Alexa app to start music playback. 7.9.2 AirPlay JBL Bar 1300_xxxx JBL Bar 500_xxxx Play 1. On an iOS device, enter the Control Center. 2. Tap to select multiple connected speakers as needed. 3. Start music streaming from an app. 7.9.3 Alexa MRM: Multi-Room Music ALEXA MRM 1.
8. SOUND SETTINGS 9. RESTORE FACTORY SETTINGS 8.1 Audio sync By restoring the default settings defined at factories. you remove all your personalized settings from the soundbar. With the audio sync function, you can synchronize audio and • On the soundbar, press and hold for more than video to make sure that no delay is heard from your video content.
Updating through a USB storage device 10. SOFTWARE UPDATE For optimal product performance and your best user experience, JBL may offer software updates for the soundbar system in the future. Please visit www.jbl.com or contact JBL call center to Software update files Software update files receive more information about downloading update files.
11. RE-CONNECT THE SUBWOOFER 12. PRODUCT SPECIFICATIONS The soundbar and subwoofer are paired at factories. After General specification: power-on, they are paired and connected automatically. In some • Model: BAR 1300X (soundbar unit) special cases, you may need to pair them again. BAR 1300X SURROUND (detachable speaker) BAR 1300X SUB (subwoofer unit) •...
• 2.4G Wi-Fi transmitter frequency range: 2412 - 2472 MHz 13. TROUBLESHOOTING (2.4 GHz ISM Band, USA 11 Channels, Europe and others 13 Channels) Never try to repair the product yourself. If you have problems • 2.4G Wi-Fi transmitter power: <20 dBm (EIRP) using this product, check the following points before you request •...
Page 28
Poor audio quality from a connected Bluetooth device Remote control • The Bluetooth reception is poor. Move the source device The remote control does not work. closer to the soundbar, or remove any obstacle between the • Check if the batteries are drained. If so, replace them with source device and the soundbar.
Bluetooth SIG, Inc. and any use of such marks the U.S. and other countries. by HARMAN International Industries, Incorporated is under To control this AirPlay 2–enabled speaker, iOS 13.4 or later is license. Other trademarks and trade names are those of their required.
Please feel free to contact us at: Harman Deutschland GmbH HATT: Open Source, Gregor Krapf-Gunther, Parkring 3 85748 Garching bei Munchen, Germany or OpenSourceSupport@Harman.com if you have additional question regarding the open source software in the product.