Specifications
Width
Height
Length with basket
Weight with full fluids and
basket
Dry weight with basket
Engine
Fuel capacity
Ground speed
Width of cut
Height of cut
Clip frequency
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
35-1/2 inches (90.1 cm)
41–1/4 inches (104.8 cm)
61–1/2 inches (156.2 cm)
267 lb (121 kg)
256 lb (116 kg)
Kawasaki, 4-cycle, 3.7 (2.7
kw) air cooled OHV engine,
3600 RPM, 7.57 cu inch
(124 cc) displacement,
cast iron cylinder sleeve;
electronic ignition with integral
lighting coil; maximum noise
suppression muffler; 85 dB(A)
at operator's ear
2.64 qt. (2.5 l); regular grade
unleaded gasoline
Mowing speed: 1.3 to 3.3
MPH (2.1 to 5.3 km/h)
Transport speed: 4.9 MPH
(7.9 km/h) maximum
21 inches (53.3 cm)
1/16 to 19/64 inches (1.5
to 7.5 mm) with Micro-Cut
bedknife
11 blade (standard) 14 in.
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.
Think Safety First
Please carefully read all of the safety instructions and
decals in the safety section. Knowing this information
could help you or bystanders avoid injury.
Checking the Engine Oil Level
Check the engine oil level before each use or every 8
operating hours, refer to Checking the Engine Oil Level
in Engine Maintenance.
Filling the Fuel Tank
Important: Never use methanol, gasoline
containing methanol, gasohol containing more
than 10% ethanol, gasoline additives, premium
gasoline, or white gas because the fuel system
could be damaged. Do not mix oil with gasoline.
Gasoline is harmful or fatal if swallowed.
Long-term exposure to vapors can cause serious
injury and illness.
• Avoid prolonged breathing of vapors.
• Keep face away from nozzle and gas tank or
conditioner opening.
• Keep gas away from eyes and skin.
14