Husqvarna 592 XP Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. 592 XP
  6. Operator's manual
Husqvarna 592 XP Operator's Manual

Husqvarna 592 XP Operator's Manual

Hide thumbs Also See for 592 XP:
Table of Contents

Advertisement

Quick Links

®
®
585, 592 XP
, 592 XP
G
EN
Operator's manual
2-38

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna 592 XP

Summary of Contents for Husqvarna 592 XP

  • Page 1 ® ® 585, 592 XP , 592 XP Operator's manual 2-38...

  • Page 2: Table Of Contents

    EC Declaration of Conformity........38 Introduction Product description Intended use The Husqvarna 585, 592 XP, 592 XPG are chainsaw This chainsaw for forest service is designed for forest models with a combustion engine. work such as felling, limbing and cutting.
  • Page 3 11. Fuel level window 12. Fuel tank 13. Carburetor adjustment (585) Stop. 14. Starter rope handle 15. Air purge bulb Chain brake, engaged (right). Chain 16. Starter housing brake, disengaged (left). 17. Chain oil tank 18. Muffler 19. Chain brake and front handguard 20.

  • Page 4: Safety

    Note: Other symbols/decals on the product refer to certification requirements for some markets. Do not operate the product with one hand only. Euro V Emissions WARNING: Tampering with the engine Do not let the guide bar tip touch an voids the EU type-approval of this product. object.
  • Page 5 • Never use a product that is faulty. • Lack of concentration can lead to kickback if the kickback zone of the bar accidentally touches a • Never use a product with visible damage to the branch, nearby tree or some other object. spark plug cap and ignition cable.
  • Page 6 Do not to the hearing. hesitate to contact your dealer or Husqvarna if you • Use protective glasses or a face visor to decrease have any questions about the use of the product. We the risk of injury from thrown objects.
  • Page 7 Chain brake and front hand guard maintenance on the saw chain and guide bar, decrease the risk of accidents. Your product has a chain brake that stops the saw chain if you get a kickback. The chain brake decreases the risk of accidents, but only you can prevent them.
  • Page 8 observe caution when handling fuel and make sure there is adequate ventilation. • Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation. • Do not smoke and do not place any hot objects in the vicinity of fuel.

  • Page 9: Assembly

    professional repairs and servicing available for your • Make sure that the saw chain has the correct product. tension. If the saw chain is not tight against the guide bar, the saw chain can derail. An incorrect saw chain Safety instructions for the cutting equipment tension increases wear on the guide bar, saw chain To adjust the and chain drive sprocket.
  • Page 10 ™ Services and Husqvarna Connect apps. Instructions WARNING: on how to use the Husqvarna connectivity device are Always use protective found in the respective app. gloves when you assemble the saw chain.

  • Page 11: Operation

    3. Attach the wires to the holder for the Husqvarna 5. Connect the connector. connectivity device. 6. Remove in the opposite sequence. To assemble a spiked bumper To assemble a spiked bumper, speak to your servicing dealer. 4. Put the holder for the Husqvarna connectivity device on the air filter holder and install the 2 screws.
  • Page 12 For best results and performance use Husqvarna To fill the fuel tank two-stroke oil. • If Husqvarna two-stroke oil is not available, use a two-stroke oil of good quality for air-cooled engines. WARNING: Obey the procedure that Speak to your servicing dealer to select the correct follows for your safety.
  • Page 13 Usually, the product is thrown against the operator but can also move in a different direction. It is how you • Use Husqvarna chain oil for maximum saw chain life use the product when the kickback occurs that causes and to prevent negative effects on the environment.
  • Page 14 1. Move the front handguard forward to engage the chain brake. 2. Pull the start/stop switch (A) out and up. a) 585: Set the start/stop switch in choke position. b) 592 XP, 592 XPG: Set the start/stop switch in start position. 1471 - 001 - 18.02.2021...
  • Page 15 Note: product in the direction of the operator. The choke is disengaged automatically on 592 XP and 592 XPG. 7. Quickly disengage the throttle trigger lockout to set the product to idle speed. 8. Move the front handguard rearward to disengage the WARNING: chain brake.
  • Page 16 2. Cut approximately ⅔ through the trunk and then CAUTION: Engine damage can occur if stop. Turn the trunk and cut from the opposite side. the engine runs for too long at full throttle without load. 1. Put the trunk on a saw horse or runners. To cut a trunk that has support on one end WARNING: Make sure that the trunk...
  • Page 17 2. Cut through the remaining part of the trunk on the b) Select the applicable cutting technique for the push stroke to complete the cut. tension in the branch. WARNING: Stop the engine if the saw chain gets caught in the trunk. Use a lever to open up the kerf and remove the product.
  • Page 18 a) Select the applicable cutting technique for the 2. Make sure that no person is in the risk zone before tension in the branch. or during felling. To calculate the felling direction 1. Examine in which direction it is necessary for the tree to fall.
  • Page 19 To fell a tree Husqvarna recommends you to make the directional cuts and then use the safe corner method when you fell a tree. The safe corner method helps you to make a correct felling hinge and control the felling direction.
  • Page 20 To use the safe corner method b) Cut on the pull stroke through the remaining trunk. The felling cut must be made slightly above the directional cut. c) Cut straight into the trunk from the other side of the tree to complete the felling hinge. d) Cut on the push stroke, until ⅓...
  • Page 21 • For temperatures below -5°C/23°F or in conditions • Tractor-mounted with snow, a winter cover is available. Assemble the winter cover on the starter housing. The winter cover decreases the flow of cool air and keeps snow away from the carburetor space. •...

  • Page 22: Maintenance

    8. Cut the tree/branch from the opposite side of the WARNING: Be very careful when bend, after the tension is released. you cut a tree that is in tension. There is Heated handles (592 XPG) a risk that the tree moves quickly before or after you cut it.
  • Page 23 Daily maintenance Weekly maintenance Monthly maintenance Turn the guide bar, do a check of the Clean the carburetor area. Do a check of all cables and connec- lubrication hole and clean the groove tions. in the guide bar. Refer to To do a check of the guide bar on page 32 .
  • Page 24 To do a check of the throttle trigger and 2. Make sure that the front hand guard moves freely and that it is attached safely to the clutch cover. throttle trigger lockout 1. Make sure that the throttle trigger and throttle trigger lockout move freely and that the return spring works correctly.
  • Page 25 To do a check of the right hand guard 2. Make sure that the muffler is correctly attached to the product. • Make sure that the right hand guard is not damaged and that there are no defects, such as cracks. To do a check of the vibration damping system 1.
  • Page 26 To adjust the high speed needle (H) fumes from your product. You can only turn the adjustment screws maximum ½ turn. The engine is adjusted at the factory to operate at sea level. At higher altitudes, in different weather or different temperatures it can be necessary to adjust the high speed needle.
  • Page 27 4. Let the pulley rotate slowly rearward to release the 6. Make sure that you can turn the pulley ½ turn after recoil spring. the starter rope is fully extended. 5. Remove the center screw and remove the pulley. WARNING: You must be careful when you replace the return spring or the starter rope.
  • Page 28 Replace a worn or damaged guide bar or saw chain with the guide bar and saw chain combination recommended by Husqvarna. This is necessary to keep the safety Accessories on page functions of the product. Refer to 36 , for a list of replacement bar and chain combinations that we recommend.
  • Page 29 It is not easy to sharpen a saw chain correctly without the correct equipment. Use Husqvarna file gauge. This Do not use a blunt saw chain. If the saw chain is blunt, will help you to keep maximum cutting performance and you must apply more pressure to push the guide bar the kickback risk at a minimum.
  • Page 30 Decrease the pressure on the pull stroke. 1. Use a flat file and a depth gauge tool to adjust the depth gauge setting. Only use Husqvarna depth gauge tool to get the correct depth gauge setting and bevel for the depth gauge.
  • Page 31 To do a check of the rim sprocket 4. Tighten the saw chain until it is tight against the guide bar but still can move easily. The clutch drum has a rim sprocket that can be replaced. 5. Tighten the bar nuts using the wrench and lift the 1.
  • Page 32 To examine the cutting equipment 4. Examine the groove in the guide bar for wear. Replace the guide bar if it is necessary. 1. Make sure that there are no cracks in rivets and links and that no rivets are loose. Replace if it is necessary.

  • Page 33: Troubleshooting

    1. Turn the adjustment screw for the oil pump. Use a To clean the cooling system screwdriver or combination wrench. a) Turn the adjustment screw clockwise to decrease The cooling system keeps the engine temperature the chain oil flow. down. The cooling system includes the air intake on the b) Turn the adjustment screw counterclockwise to starter (A) and the air guide plate (B), the pawls on the increase the chain oil flow.

  • Page 34: Transportation And Storage

    Product part to examine Possible cause Action Fuel tank Incorrect fuel type. Drain the fuel tank and fill with cor- rect fuel. The fuel tank is filled with chain oil. If you have tried to start the product, speak to your servicing dealer. If you have not tried to start the product, drain the fuel tank.

  • Page 35: Technical Data

    CAUTION: If the saw chain and guide bar are not cleaned, they can become rigid or blocked. Technical data Technical data Husqvarna 585 Husqvarna 592 XP Husqvarna 592 XPG Engine Cylinder displacement, cm 86.0 92.7 92.7 Idle speed, rpm...

  • Page 36: Accessories

    Accessories Recommended cutting equipment Kickback and guide bar nose radius Chainsaw models Husqvarna 585, 592 XP, 592 XPG For sprocket nose bars the nose radius is defined by the have been evaluated for safety according to EN ISO number of teeth (for example 10T). For solid guide bars 11681-1:2011 (Machinery for forestry - Portable the nose radius is defined by the size of the nose radius.
  • Page 37 5.5 mm / 7/32" 586 93 85-01 0.65 mm / 0.025" 30° 60° 1471 - 001 - 18.02.2021...

  • Page 38: Ec Declaration Of Conformity

    Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chainsaws for forest service Husqvarna 585, 592 XP and 592 XPG from 2020’s serial numbers and onwards (the year is clearly stated in plain text in the type marking with subsequent serial number), are in conformity with the requirements of the COUNCIL’S...
  • Page 39 1471 - 001 - 18.02.2021...
  • Page 40 Original instructions 1142201-26 2021-03-02...

This manual is also suitable for:

585592 xp g

Table of Contents