Advertisement
Light radiation hazard
Infrared (IR) radiation is emitted from the top heating area.
The enclosures limit radiation in compliance with the requirements of the exempt group in International
Electrotechnical Commission (IEC) 62471:2006
not modify the top cover enclosure, the glass or the windows.
Chemical hazard
Sufficient ventilation needs to be provided to ensure that potential airborne exposure to chemical
substances is adequately controlled. Consult your usual air conditioning or Environmental Health and
Safety (EHS) specialist for advice on the appropriate measures for your location.
Respiratory personal protective equipment may be required throughout the entire operation of these
machines. Refer to the Safety Data Sheet of your metallic powder, and consult your Environmental
Health and Safety (EHS) specialist for advice on the appropriate measures for your location and
application.
To manipulate material (load, unpack, and so on) and green parts, use protective personal equipment
according to the Safety Data Sheets of your processed material.
Use HP-branded agents only. Do not use unauthorized third-party agents.
Take special care in any zones marked with warning labels.
Ventilation
Fresh air ventilation is needed to maintain comfort levels.
Adequate ventilation also needs to be provided to ensure that potential airborne exposure to powders
and agents is adequately controlled according to their safety data sheets.
Air conditioning and ventilation should meet local environmental, health, and safety (EHS) guidelines and
regulations. Please follow these instructions carefully when designing the air-conditioning installation
and placing your equipment in the room.
NOTICE:
The ventilation units should not blow air directly onto the equipment.
Air conditioning
As with all equipment installations, to maintain ambient comfort levels, air conditioning in the work area
should take into account that the equipment produces heat.
Typically, the printer's power dissipation is about 4-6 kW/h (13.65-20.47 kBTU/h) and the curing station's
power dissipation is about 3-4 kilowatts per hour (10.24-13.65 kBTU/h). About 70 % of this power is
removed throughout the exhaust connection.
Typically, the load station's power dissipation is 7 kW (23.9 kBTU/h).
Air conditioning should meet local Environmental Health and Safety (EHS) guidelines and regulations.
NOTICE:
The air conditioning units should not blow air directly onto the equipment.
Sound pressure level
Declared dual number noise emission values in accordance with ISO 4871, corresponding to the worst
bystander position according to ISO 11202, located at the rear of the product.
8
Chapter 1 HP Metal Jet S100 Powder Removal Station Introductory Information
Photobiological safety of lamps and lamp systems . Do
Advertisement
