FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
Step 3 Choose Maint > Performance Maint on the home screen to access the
Performance Maint screen. Then clear the air filter runtime.
----End
10.2 Replacing the Wet Film Humidifier
Context
Tool: Phillips screwdriver
Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the unit is still energized after it is shut down on the
screen of the display module.
Step 2 Remove the middle air filter and switch off the active and standby input circuit
breakers (QF1 and QF2) of the smart cooling product.
Step 3 Remove the two screws using a Phillips screwdriver and remove the humidifier
fastener.
Step 4 Remove the hose clamp and remove the water inlet pipe.
Step 5 Remove the wet film humidifier.
Figure 10-2 Removing the wet film humidifier
Step 6 Reinstall the wet film humidifier by performing
Issue 05 (2022-12-15)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
Step 5
to
Step
2.
120