Cherry MW 2180 - Wireless Mouse Manual

Table of Contents

Contents

1 Before you begin
2 For your safety
3 Connecting the receiver to the PC/ laptop
4 Storing the receiver in the mouse
5 Setting the sensitivity of the mouse (DPI rate)
6 Surface under the mouse
7 Energy-saving function
8 Battery status
9 Configure devices individually
10 Cleaning the mouse
11 If the mouse is not working
12 Disposing of the devices and batteries
13 Technical data
14 Certifications
15 Documents / Resources
- 15.1 References
- 15.2 Download manual

Before you begin

Every device is different!
The operating instructions contain information on effective and reliable use.

Read the operating instructions carefully.
Keep the operating instructions and pass them on to other users.

The CHERRY MW 2180 is a wireless mouse for operating PCs and laptops.
For information on other products, downloads and much more, visit us at www.cherry.de.

For your safety

warning Risk of choking from swallowing small parts

Keep the device out of the reach of children under 3 years.

danger Danger of explosions due to wrong or incorrectly inserted battery

Only use batteries of the type named in the technical specification.
Insert the battery in accordance with the markings (+/-) in the battery compartment.

warning RSI stands for "Repetitive Strain Injury"
RSI arises due to small movements continuously repeated over a long period of time.

Set up your workspace ergonomically.
Take several short breaks, with stretching exercises if necessary.
Change your posture often.

Connecting the receiver to the PC/ laptop

Pull the receiver out of the compartment on the bottom of the mouse.
Connect the receiver to a USB 2.0 port on your PC/ laptop if possible (this usually has a white or black guide).
Insert a battery into the mouse.

Storing the receiver in the mouse

The receiver is so small that it can stay in the USB socket of a laptop while being transported. To avoid any damage, you can also pull out the receiver and deposit it in the mouse to protect it from dirt and loss.

Setting the sensitivity of the mouse (DPI rate)

DPI button with LED for battery status, DPI setting and wireless connection.

For precise work you can change the resolution of the mouse sensor. The speed of the mouse pointer increases with the level of the DPI rate.

Press the DPI button.
The DPI rate changes every time the button is pressed. The LED flashes according to the setting:
1x = 1000 dpi,
2x = 1600 dpi,
3x = 2400 dpi

Surface under the mouse

The mouse is most effective on a light-colored, textured surface, which saves energy and ensures optimal motion detection.
A reflective surface is not suitable for using the mouse on.

Energy-saving function

When not in use, the mouse switches to a energysaving mode which requires almost no power. The first movement switches it back on automatically.
When the mouse is transported, it recognizes this as movement and is permanently activated. For this reason, to preserve the battery, you should remove it from the mouse during transport.

Battery status

When the voltage of the mouse battery drops, the LED starts to flash slowly.

Replace the battery as soon as possible.

Configure devices individually

With the CHERRY KEYS software you can freely assign the mouse buttons and many keys on the keyboard. This allows you to access apps, files, individual text modules or macros at the touch of a button.
You can obtain CHERRY KEYS as a free download at www.cherry.de.
Give it a go!

Cleaning the mouse

Remove the battery from the mouse.
NOTICE: Damage due to aggressive cleaning agents or liquid in the mouse
- Do not use solvents such as benzene, alcohol, scouring agents or abrasive scourers for cleaning the mouse.
- Prevent any liquid from getting inside the mouse.
Clean the mouse with a slightly damp cloth and some mild detergent (such as washing-up liquid).
Dry the mouse with a soft, lint-free cloth.

If the mouse is not working

Check whether the battery is inserted correctly and has sufficient voltage.
Connect the receiver to a USB 2.0 port on your PC/laptop (this usually has a white or black guide). Malfunctions occasionally occur on USB 3.0 ports (blue guide).
Connect the receiver to another USB 2.0 port on the PC/laptop.
To establish a new connection to the receiver:
- Hold the mouse as close as possible to the receiver.
- Simultaneously press the Scroll button and the left and right mouse buttons and hold for 3 seconds.
  The LED lights up for 20 seconds.
- During this time, disconnect the receiver from the USB port and plug it back in again.
  When the LED goes out, the connection is established. If the mouse is not working: Repeat the process.

Disposing of the devices and batteries

Do not dispose of devices and batteries with this symbol in household waste.
Take the batteries out of the devices.
Dispose of the devices and batteries in accordance with statutory regulations – at your local dealer or at municipal recycling centers.

Technical data

Designation	Value
Supply voltage	Mouse: 0.9... 1.5 V SELV Receiver: 5.0 V/DC ±5% SELV
Power consumption	Mouse: max. 10 mA Receiver: max. 25 mA
Battery	1 alkaline-manganese battery, type LR6 (AA)
Transmission frequency	2400.0... 2483.5 MHz
Transmission power	Max. 10 mW (EIRP)
Storage temperature	-20°C... +65°C
Operating temperature	0°C... +50°C

Certifications

EU Declaration of conformity

The company Cherry Europe GmbH, Auerbach/OPf., Germany hereby declares that this radio system model conforms to the European guideline 2014/53/EU. The full text of the EU declaration of conformity can be found under the following Internet address: www.cherry.de/compliance.

Federal Communications Commission
(FCC) Radio Frequency Interference Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CONTACT For Europe
Cherry Europe GmbH
Cherrystraße 2 91275 Auerbach/OPf.
Germany
Internet: www.cherry.de
For USA
Cherry Americas, LLC
5732 95th Avenue
Suite 850
Kenosha, WI 53144
USA
Tel.: +1 262 942 6508
Email: sales@cherryamericas.com
Internet: www.cherryamericas.com