Table of Contents
Advertisement
QWIK-PURE
®
Illustration
46 | 64
Installation and operation manual
Description / explanation
14. Place the end cap on the filter cartridge and turn
it clockwise all the way.
15. Remove the cover from the pressure relief
chamber and remove the activated carbon mat
from the vent of the pressure relief chamber.
0 Check the activated carbon mat for heavy
soiling (e.g. mould, oil saturation, etc.) and
replace it if necessary.
16. Fill the QWIK‑PURE
vent.
0 Stop filling it as soon as water comes out
from the condensate drain.
17. Insert the activated carbon mat into the vent of
the pressure relief chamber and place the cover
on the pressure relief chamber.
18. Slowly open the condensate feed.
19. Check all hoses and connections for leaks (see
section "9.3.5 Leakage test" on page 49).
with tap water via the
®
Advertisement
Table of Contents
