Advertisement
Reconnecting the Smart Touch Control
If you need to re-establish the connection between the TV and the Smart Touch Control,
remove the Smart Touch Control's battery cover, aim the Smart Touch Control at the TV's
remote control receiver, and then press and release the pairing button on the back of the Smart
Touch Control. The Smart Touch Control will perform the pairing process described on page 5.
Battery Low Alarm
When the Smart Touch Control's batteries become low, an alarm window appears at the bottom left of
the TV screen. When the alarm window pops up, replace the batteries in the Smart Touch Control with
fresh alkaline batteries.
e-Manual Guide
The e-Manual embedded in your TV contains information about your TV's key features. To view the e-manual, use one of the following
methods:
• Open the Support menu and choose e-Manual (Troubleshooting).
• Press the
button on the Smart Touch Control to display the virtual remote panel on the screen. Flick left or right on the touch pad
MORE
until the e-Manual icon appears. Highlight the icon, and then press the touch pad.
A printable version of this guide is also available at www.samsung.com/support.
✎
For more detail information about the Smart Touch Control as shown below, refer to the e-Manual.
• Using the touchpad
• Changing Channels by Entering Numbers
• Show Status and Notification Banner and
• Using the Virtual Remote Control
[SEK-1000]BN68-05216E-01L02.indb 7
RECOMM. / SEARCH
(or HISTORY/SEARCH) button (Depending on the country or region).
English-7
<The Smart Touch Control's pairing button>
2013-07-26
4:41:51
Advertisement
