4.12
Other Devices
4.12.1
SFC block device (BL)
The SFC block is used to check that the specified block in the SFC program is activated.
Remark
For use of the SFC block device, refer to the following.
MELSEC-Q/L/QnA Programming Manual (SFC)
4.12.2
Network No. specification device (J)
The network No. specification device is used to specify the network number in the link dedicated instructions.
(1) Specification method
Specify as shown below by using the link dedicated instructions.
Remark
For details of the link dedicated instructions, refer to the following.
Manual for each network module
JP.READ
Jn
S1 S2 S3 D
Network No. specification device
(n: network No.)
Instruction name
Network No. specification instruction
CHAPTER 4 DEVICES
4
413