Problem Areas
1.4
Display
1.4.1 Graphics & Illumination
Check:
Check whether the phone vibrates after the on/off key has
been pressed.
Action:
If the activation described above is not detected, refer to
section 1.1 'Power'.
Check:
Inspect the BtB connector of LCD FPC to Main FPC Assy.
Action:
1. If not properly connected – disconnect and reconnect it.
2. If dirty or oxidized – clean it.
3. If the BtB connector of LCD FPC or FPC is damaged –
replace the Display Frame Assy.
3. If the BtB connector of Main FPC Assy or FPC is
damaged – replace the Main FPC Assy.
1290-1679 Rev 3
©
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
15(58)