Tests: Service Tests
By tilting the phone in various directions, the X: Y: Z values
will change in size and polarity depending on the angle and
direction as shown in the adjacent picture.
Check by tilting the phone that the X: Y: Z values shown in
the display are in accordance with the tilting shown in the
picture.
Press the Back key to return to the Service Test Menu.
Make sure perform Accelerometer test after G-sensor
Calibration.
For G-sensor Calibration, refer to 1277-8589 Trouble
Shooting Application
2.2.19 Proximity switch
When entering into the test, the screen shows 'Not detected'
When covering the proximity switch area, the screen will
show 'Detected' on the screen.
Press the Back key to return to the Service Test Menu.
2.2.20 Real time clock
Press the screen to start.
During the actual test the text 'Real time clock test' is
displayed, and then followed by a message stating whether
the test was OK or not.
Press the Back key to return to the Service Test Menu.
1277-1359 Rev 2
© Sony Mobile Communications AB – Company Internal
Test Instructions (mech)
15(25)