Replacement:
4.56 Magnetic connector
Follow the 3.2, 3.10-3.12 and 3.17 Disassembly instructions!
Carry out the Removal as described below.
Prepare the new Magnetic connector.
Carry out the Installation as described below.
Follow the 5.4, 5.9-5.11 – 5.19 Reassembly instructions!
REMOVAL
Push the two pads of Magnetic charger connector by using
Flex Film Assembly Tool.
Scrap! Not to be reused!
INSTALLATION
Mount a new Magnetic charger connector by fingers.
Then use Side Panel press, Side Panel Press Head and
Charge connector press pad with the force of 60N for five
seconds. According to 1003-9107 Tool Catalogue –
mechanical and document Side Panel press Instruction for
use.
1288-9438
Rev 2
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
63(97)