Haier 6 Series User Manual page 10
Hide thumbs
Also See for 6 Series:
- Manual (228 pages) ,
- Installation and user manual (134 pages) ,
- User instructions (55 pages)
Table of Contents
Advertisement
Available languages
Available languages
ELECTRICAL HOOK-UP
ELECTRICAL HOOK-UP
Before connecting to the electricity, make
Before connecting to the electricity, make
sure that:
sure that:
• the characteristics of the electrical system
• the characteristics of the electrical system
satisfy what is shown on the serial number
satisfy what is shown on the serial number
plate applied to the front of the oven;
plate applied to the front of the oven;
• the system has an effective earth con-
• the system has an effective earth con-
nection compliant with current stand-
nection compliant with current stand-
ards and laws.
ards and laws.
The earth connection is required by law. The
The earth connection is required by law. The
cable must not, at any point, reach a temper-
cable must not, at any point, reach a temper-
ature greater than 50 °C above the ambient
ature greater than 50 °C above the ambient
temperature.
temperature.
This oven must be connected to the electric-
This oven must be connected to the electric-
ity through a power supply cable and plug that
ity through a power supply cable and plug that
is compatible with the outlet of the electrical
is compatible with the outlet of the electrical
system that powers this oven.
system that powers this oven.
If a fixed appliance does not have a power cord
If a fixed appliance does not have a power cord
and plug, or another device that ensures dis-
and plug, or another device that ensures dis-
connection from the mains, with an opening
connection from the mains, with an opening
distance of the contacts that allows complete
distance of the contacts that allows complete
disconnection under the conditions of exces-
disconnection under the conditions of exces-
sive voltage category III, such disconnection
sive voltage category III, such disconnection
devices must be provided in the power supply
devices must be provided in the power supply
mains conforming to the installation rules.
mains conforming to the installation rules.
The omnipolar socket or switch must be easy
The omnipolar socket or switch must be easy
to reach when the appliance is installed.
to reach when the appliance is installed.
NOTE: The manufacturer declines all liability if
NOTE: The manufacturer declines all liability if
the usual accident prevention standards and
the usual accident prevention standards and
the above instructions are not followed.
the above instructions are not followed.
TYPE AND MINIMUM DIAMETER
TYPE AND MINIMUM DIAMETER
OF THE CABLES
OF THE CABLES
SASO
SASO
H05RR-F
H05RR-F
3x1,5 mm²
3x1,5 mm²
H05RR-F
H05RR-F
H05VV-F
H05VV-F
3x1,5 mm²
3x1,5 mm²
H05VV-F
H05VV-F
H05RN-F
H05RN-F
3x1,5 mm²
3x1,5 mm²
H05RN-F
H05RN-F
H05V2V2-F
H05V2V2-F
3x1,5 mm²
3x1,5 mm²
H05V2V2-F
H05V2V2-F
EN 18
EN 18
3x2,5 mm²
3x2,5 mm²
3x2,5 mm²
3x2,5 mm²
3x2,5 mm²
3x2,5 mm²
3x2,5 mm²
3x2,5 mm²
EN 19
EN 19
Advertisement
Chapters
Table of Contents
