Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
1.1.
ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
‰
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and
all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products. You may obtain an RCD by contacting your local Sealey stockist.
If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT (Portable
Appliance Test) tested.
Electrical safety information, it is important that the following information is read and understood.
1.1.1.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
1.1.2.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
1.1.3.
IMPORTANT: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse - see fuse rating in these instructions.
DO NOT pull or carry the appliance by the power cable.
8
DO NOT pull the plug from the socket by the cable. Remove the plug from the socket by maintaining a firm grip on the plug.
8
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or replaced immediately by a
8
qualified electrician.
1.1.4.
This product is fitted with a BS1363/A 3 pin plug.
If the cable or plug is damaged during use, switch the electricity supply and remove from use.
Replace a damaged plug with a BS1363/A 3 pin plug. If in doubt contact a qualified electrician.
Class II products are wired with live (brown) and neutral (blue) only are marked with the
Class II symbol;
A) Connect the BROWN live wire to the live terminal 'L'.
B) Connect the BLUE neutral wire to the neutral terminal 'N'.
C) After wiring, check that there are no bare wires and ensure that all wires have been correctly connected.
Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.
DO NOT connect either wire to the earth terminal.
8
Power tool plugs must match the outlet. Never modify the plug in any way. DO NOT use any adaptor plugs with earthed (grounded)
1.1.5.
power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
1.1.6.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
8
DO NOT abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from the heat, oil,
8
sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
1.1.7.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
1.1.8.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Sealey recommend that repairs are carried out by a qualified electrician.
1.2.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions, illustrations, and specifications provided with this power tool.
‰
Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warning and instructions for future reference.
9
1.2.1.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark area invite accidents.
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away whilst operating a power tool. Distractions can cause you to lose control.
9
Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment.
9
© Jack Sealey Limited
Ø215MM HANDHELD DRYWALL ELECTRIC
SANDER 1050W
MODEL NO:
Wear ear
Wear protective
protection
gloves
Original Language Version
DWS215
Wear a mask
Recommended fuse rating:
13A
DWS215
Issue 1
08/11/22
Advertisement
Related Manuals for Sealey DWS215
Summary of Contents for Sealey DWS215
- Page 1 DWS215 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
-
Page 2: Personal Safety
DO NOT convert this power tool to operate in a way which is not specifically designed and specified by the tool manufacturer. DWS215 Issue 1 08/11/22 Original Language Version © Jack Sealey Limited... -
Page 3: Specification
Fitted with 4m mains cable. Supplied with 8 x Ø225mm sanding paper, flexible pipe for dust extraction alongside dust bag and side handle. 3. SPECIFICATION fig.1 Model No.: ...............DWS215 Motor Power:...............1050W Noise Power/Pressure: ........99/88dB(A) No-Load Speed: ..........1500-2300rpm Pad Size: .............. - Page 4 fig.3 fig.4 fig.2 5. PREPARATION 5.1. Before using the tool for the first time, ensure the Safety warnings in section 1 are fully understood and followed. 5.2. Use suitable detectors to find hidden utility lines (gas, electric and water). 5.3. DO NOT work materials containing asbestos (asbestos is considered carcinogenic) 5.4.
-
Page 5: Operation
Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. REGISTER YOUR PURCHASE HERE Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk...