Advertisement
Initial Setting of App
Installation of App
Go to Google Play or the Apple Store (depending on your smartphone) and download the "airCloud Home" Application.
※ Please read and agree to "the Terms of Use" on the App.
※ The App is free. Communication charges will be incurred for download and operation as per the local cell phone
provider.
※ Android is a trademark and registered by Google LLC.
※ iPhone is a trademark and registered by Apple Inc.
※ QR code is a trademark and registered by DENSO WAVE Inc.
Registration on App
(1) Click "Create Account".
(2) Enter your name and click "Continue".
(3) Enter your phone number and password (or click "E-mail" tab, and enter your E-mail address and password), read
the "terms and condition" and check on the box, click "Continue".
(1)
(2)
(4) Enter received verification code you received and click "Continue".
(5) Click "Auto-Detect My Location" or Enter address details manually, and click "Finish".
(6) The account has been created successfully.
(4)
(5)
(7) Waiting for the Adapter to connect to your home router. When communication is established, Link LED 1 turns on,
Link LED 2 turns off.
(8) Your air conditioner has been successfully configured. You can reconnect your smart phone to your home router
following the instruction of the App.
(7)
(8)
Notes:
• If communication cannot succeed within 1 minute, please follow the instructions of the App to complete the pairing
process again.
• If a user in the group has already registered some air conditioning units, the other users in the same group can also
control the unit.
• The above is the process for using the AP method to add air conditioner. Please follow the guide on the App if you
choose to use WPS method on step(3).
Technical Specifications
−ABS plastic housing.
−Configuration: AP and WPS.
−Operating temperature: 5°C to 35°C.
−Operating humidity: between 30% and 80%.
−Index protection rating IP30.
−Pollution category: Class 2.
−Dimensions (l × w × h): 80 × 40 × 16.5 mm.
−Wireless LAN standard: IEEE 802.11b/g/n
−Security: WEP/WPA/WPA2/Open.
−Power supply: 12V 150mA DC.
−Integrated antenna.
−Frequency used and maximum power used: 2.4000 GHz - 2.4845 GHz/erp < 100 mW.
(3)
(6)
8:00
8:00
- 5 -
(9)
- 7 -
Note:
The first registered user can manage all the users and set access rights as a group owner. Group owner can invite
others to register.
Air Conditioner Registration and Router Connection
Make sure that the Adapter is properly installed and the air conditioner is plugged in, then follow the steps below to
add your air conditioner device to the App.
(1) Click "Add Air Conditioner" on the top screen after registration and login your App.
(2) Scan QR code on the bundled SSID&KEY label.
(3) Select "Connect using AP method".
(1)
(2)
(4) If the SSID shown on the App is your home router, enter your home router password, click "OK". Otherwise, click
"Change Wireless Network", select your home router enter password and click "OK".
(5) Press and hold the MODE button for 3 to 7 seconds until Link LED 2 flashes. The Link LED 2 keeps flashing till
communication with the Wi-Fi router is succeeded.
(6) Click "Change Wireless Network", select the Wi-Fi access point of the Adapter with SSID printed on the bundled
SSID&KEY Label, input password (the KEY). Click right arrow icon on the screen top to continue for connecting
your smart phone with the Adapter.
(4)
(5)
FCC Declaration of Conformity
Contains FCC ID:TX-RTL8710BN
Contains IC ID:4491A-RTL8710BN
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage,
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
FCC Radio Frequency Interference Warnings and Instructions
CAN ICES-3 (B)/NMB-3(B)
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CONFORMS TO UL STD. 60335-1 & 60335-2-40
CERTIFIED TO CSA STD.C22.2 NO.60335-1 & 60335-2-40
Responsible party(company name): Johnson Controls-Hitachi Air Conditioning, Inc.
Address: 507 E. Michigan St, Milwaukee, WI USA
Name and Job Title: Darcey Hanson - Manager, Strategy & Marketing
E-mail: BE-VRFTechsupport@jci-hitachi.com
Tel.: 414-524-8295
Manufacturer: Johnson Controls-Hitachi Air Conditioning Wuhu Co., Ltd.
No.2 Qiluoshan Road, Wuhu City, Anhui Province 241009, China
Tel: +86-553-5846669
(3)
(6)
- 6 -
- 8 -
LIT 12013852
Advertisement
