Table of Contents
Advertisement
Put the product on a flat surface.
For all servicing and repair work on the product, special
training is necessary. Professional repairs and servicing
is available. If your dealer is not a service agent, speak
to them for information about the nearest service agent.
For spare parts, speak to your Husqvarna dealer or
service agent.
Maintenance
Make sure that there are no fuel or oil leaks.
Clean the product.
Make sure that nuts and screws are tightened.
Do a check of the fuel level and the engine oil level.
Clean the cooling fins of the engine.
Make sure that the throttle control and the blade pitch
®
knob or Pro-Shift
lever can move smoothly.
Clean the air filter.
Lubricate the blade shafts.
Lubricate the blade pitch cable and other parts of the
product.
Replace the engine oil.
Replace the air filter.
Do a check of the engine speed.
Do a check of the oil level in the gearbox.
Examine the belt for damage and replace if necessary.
Examine and clean the spark plug. Replace the spark
plug if it is necessary.
Clean the fuel valve on the carburetor.
Clean the spark arrestor screen on the muffler.
Clean the sediment cup.
Drain the fuel and clean the fuel tank and the fuel filter.
Clean and adjust the carburetor.
To clean the product
CAUTION:
washer to clean the product.
•
Use water and a brush to clean the product.
16
Do not use a high-pressure
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
Before use,
After the
each 10 h
first 20 h
*
X
*
X
O
*
X
X
X
X
X
O
CAUTION:
directly at the fuel tank cap, electrical
components or the engine.
•
Remove concrete from the surfaces of the product
after each operation before the concrete becomes
hard.
•
Remove grease and oil from the handle.
Monthly,
Yearly, each
each 200 h
500 h
O
*
X
X
X
O
X
X
X
O
O
O
O
O
O
Do not point the water
1452 - 003 - 30.01.2023
Advertisement
Table of Contents
