Installing The Hard Disk On The Mounting Bracket - Epson ActionDesk 4000 User Manual

S041886
Hide thumbs Also See for ActionDesk 4000:
Table of Contents

Advertisement

7. Slide the bracket toward the side of the computer, as shown
below, until the tabs hold the bracket in place.
8. Secure the mounting bracket with a screw on each side, as
shown above.

Installing the Hard Disk On the Mounting Bracket

You can install a hard disk drive on top of the mounting bracket
rather than under it. Refer to the illustration of the mounting
bracket on page 5-8 and the one below while following these steps:
1.
Remove the screw securing the mounting bracket to the base
of the computer and slide the mounting bracket toward the
diskette drive bays until the slots clear the tabs. (See the
illustration on page 5-8.)
2. Lift the mounting bracket out of the computer.
5-10
Installing and Removing Drives

Advertisement

Table of Contents
loading

Table of Contents