Epson Stylus
NX430
®
Small-in-One
™
Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on and adjust
1
Raise the paper support, then connect the power cord to
the back of the printer and to an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel, then press the
Note:
If you want to lower the control panel, squeeze the release
bar underneath.
Caution:
Do not lower the control panel without first squeezing the
release bar underneath or you may damage the product.
*412184000*
*412184000*
3
To select English as your language, press OK.
If you want to change the language, press
press OK.
Note:
panel. For more information, see the online User's Guide.
4
Note:
1
2
3
power button.
4
Select language
You can change the language later using the product's control
Install ink cartridges
Don't load paper yet.
Lift up the scanner unit, and wait until the ink cartridge
holder stops moving.
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
Remove only the yellow tape from each cartridge.
Caution:
Don't remove any other seals or the cartridges may leak.
Insert the cartridges in the holder for each color, and press
each cartridge down until it clicks.
or
to select it, then