Table of Contents
Advertisement
METPOINT
®
CID
3.
Note: For the horn, the valid distance range is 1 ... 6 meters (40 ... 236 inches).
4.
State
Best case
Assess how plausible
the measurement is
Move to the valid
distance range
Move to a different
surface close to the
leak until the "best
case" occurs and the
measurement is robust
Important: The distance measurement can be challenging on black surfaces or in very bright
environments, which is why distances can still be entered manually. To be able to enter manual
distances, disable the "Distance by Laser" option.
14 | 28
In order to automatically use the measured distance to calculate
costs, you will need to enable the "Distance by Laser" option under
"Parameter."
Important: The laser must be switched on before you enable
"Distance by Laser." Otherwise, the icon will flash yellow and red
and say "Laser?".
The METPOINT
CID will now update the distance automatically.
®
The currently measured distance will be shown in the grey "Dist:"
bar. Meanwhile, the distance used for cost calculations will be
shown in the small bar at the bottom left next to the pressure.
Current distance
measurement
white
yellow
white
red
Distance parameter
used internally
Green
yellow
yellow
Empty
Quick Start Guide
Likelihood that the
distance is being
measured correctly
High
Medium
High, but distance
outside of valid range
Low
Advertisement
Table of Contents
