Using HMI
4.
4.16
Viewing fault records
The Fault Records page is usually one of the Operator pages.
1.
50
Tap Save to USB to save the selected records to the USB memory.
Save to USB is not activated until a USB memory is connected to the
USB port of the HMI.
Figure 31: Selecting disturbance records
Tap Trigger Recording to manually trigger a recording.
Swipe the LHMI screen until the Fault Records page is shown. The fault records
stored in the relay are listed by time stamps on the left of the page.
1MRS759118 D
REX640
Operation Manual