Table of Contents
Advertisement
1-6. Removal/Installation of Cabinet
1-6. Removal/Installation of Cabinet
m
. Be sure to turn off the power, then pull out the power cord and/or battery before performing the follow-
ing procedure. If not, damage to internal circuit may result.
. The standard tightening torques of main screws used in this unit are as follows:
M1.4 (+) screw
M2 (+), M3 (+) and hexagon screws : 19 x 10
Rib of the fromt lid
Screws
Screws
Outside Panel
Hook section of the outside panel
Screws
1-14
: 9 x 10
2
N.m (0.9 kgf.cm)
-
2
N.m (1.9 kgf.cm)
-
Handle
Front lid
CN27
Hinge
Flexible card wires
Screws
CN30
Inside panel
Hinge
Inside panel
CN102
CN701
Screws
Tighitening torque 80 x 10
Protection
cover
CN101
Shield plate
-2
N.m (8.1 kgf.cm)
DNV-5
Advertisement
Table of Contents
