Table of Contents
Advertisement
11. When the status field indicates "Ready", a Note Window will open.
Step 2: Quick verify process
This section allows you to verify that the hardware, device driver, and
SwiftAPI function correctly.
1. After re-booting the system (see step 11 in the previous section),
2. run csdiag -1
3. If the csdiag diagnostic program outputs a list of accelerators similar
Step 3: Install the Netscape plug-in module
This procedure installs the Netscape plug-in module.
1. Make sure that the Netscape Server has already been installed and
For instructions on how to setup SSL under Netscape, please refer to
NOTE
Netscape documentation.
Chapter 3
control scripts for the fileset, and builds the kernel. The estimated
time required for processing will be 3 - 5 minutes.
Activate the "OK" button on the Note Window to reboot the system.
change into the /opt/cryptofast subdirectory.
Sample Output (example has two SpeedCards)
>csdiag -l
Praesidium SpeedCard Diagnostics & Maintenance
Accelerators
Accelerator
Hardware
Card 0
103c:2.0.0
Card 1
103c:2.0.0
to the output above, the hardware, device driver and SwiftAPI are
working properly.
the SSL secure protocol is functional. Point a web browser to
https://<servername> to verify.
Installing the Software
Firmware
BIOS
2.0.22
0.0.0
2.0.22
0.0.0
Installation
37
Advertisement
Table of Contents
