Table of Contents
Advertisement
Before Recording
Registering an External HDD
If you would like to make a Recording to an External
HDD, you need to Register the External HDD with this
unit beforehand.
(Refer to 'External HDD Connection' on page 20.)
How to Insert a Disc
1
Press [ A (Open/Close) ] to Open the
Disc Tray.
2
Replace the disc on the Disc Tray with
its label side facing up.
3
Press [ A (Open/Close) ] to Close the
Disc Tray.
• It may take a while to load the disc Data after
the Disc Tray Closes.
To eject the disc:
• Press [ A (Open/Close) ] to Open the Disc Tray,
then remove the disc.
Note(s)
• When inserting a brand-new DVD-RW disc,
confirmation window will appear. If you Select "Yes"
twice, the unit will Start to Initialize the disc. DVD-
RW disc will be formatted in Video mode.
Align the disc to
the disc tray guide.
Basic Recording &
One-Touch Timer Recording
Follow the steps below to Record a TV Program.
Note(s)
• When Playback of a Recorded Program is blocked
by the Child Lock, a message appears on the TV
screen. In such Cases, check the Child Lock (V-Chip)
Setting. (Please refer to page 62 for more details.)
1
Select a Media to Record .
– If you would like to make a Recording to an HDD, press
[ HDD/EXT.HDD ] repeatedly to set in HDD mode.
– If you would like to make a Recording to an
External HDD, Then, press [ HDD/EXT.HDD ]
repeatedly to set the External HDD mode.
– If you would like to make a Recording to a DVD,
you need to insert a Recordable disc. Then, press
[ DVD ] to set the DVD mode.
2
Select a Channel to Record using
[ CH +/− ], or [ the Number buttons ].
– If you would like to make a Recording from
an External Input Source, press [ SOURCE ]
repeatedly to Select the desired Input Source.
3
Press [ MENU ], then Select "Rec
Mode" using [ K / L ], then press [ OK ].
Then Select a Recording mode using
[ K / L ], then press [ OK ].
Refer to 'Rec Mode' on page 27.
4
Press [ REC ] to Start the Recording.
" " will be Displayed for 2 seconds.
Press [ F (Pause) ] to Pause Recording.
Press [ F (Pause) ] again to Restart Recording.
To Set One-Touch Timer Recording (OTR)
To Set One-Touch Timer Recording (OTR)
This is a simple way to set the Recording Time in blocks
of 15 minutes.
Press [ REC ] repeatedly until the desired Recording
Time (15 minutes to 4 hours) appears on the TV screen.
One-Touch Timer Recording will Start.
0:15
(normal Recording)
4:00
■
To change the Recording Length during the
One-Touch Timer Recording:
Press [ REC ] repeatedly until the desired length
appears.
0:15
0:30
3:45
Continued on next page.
EN - 29
EN
Advertisement
Table of Contents
