Sony AXS-R7 Service Manual page 47

Portable memory recorder
Table of Contents

Advertisement

2-11.
SCN-17 Board
Preparation
1.
Remove the docking module. (Refer to
2.
Disconnect the battery harness from the RE-340 board. (Refer to
3.
Remove the rear case assembly. (Refer to
4.
Remove the SW-1706 board. (Refer to
5.
Disconnect the RE-IF-power harness from the RE-340 board. (Refer to
from the
Connector)")
6.
Remove the duct assembly. (Refer to
7.
Remove the slot assembly. (Refer to
Procedure
1.
Remove the two radiation sheets 14X35X3 and the slot cushion.
Radiation sheets 14X35X3
AXS-R7
"2-2. Docking
Module")
"2-3. Battery
"2-4. Rear Case
Assembly")
"2-8. SW-1706
Board")
"2-9. Duct
Assembly")
"2-10. Slot
Assembly")
Harness")
"2-6. RE-IF-Power Harness (Disconnecting
Slot cushion
2-17

Advertisement

Table of Contents
loading

Table of Contents