Page 2
Getting Started Safety Information WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled RISK OF ELECTRIC SHOCK with liquids, such as vases, should be placed on the DO NOT OPEN apparatus.
Page 3
Getting Started CAUTION concerning the Power Cord For models using a battery The Power Plug is the disconnecting device. In case This device is equipped with a portable battery or of an emergency, the Power Plug must remain readily accumulator. accessible.
Page 4
Getting Started Symbols Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage.
Table of Contents Table of Contents Getting Started Operating Safety Information Operations Unique features – DRC (Dynamic Range Control) Introduction – Turn off the sound temporarily – Symbols used in this manual – Using your TV remote control Remote control –...
Getting Started Unique features Introduction Symbols used in this manual Auto power down This unit supports to turn off by itself for saving Note energy consumption. Indicates special notes and operating features. Portable In > Caution Listen to music from your portable device. (MP3 player, Notebook, Smart phone, etc..) Indicates cautions for preventing possible damages from abuse.
Getting Started Remote control • • • • • • • • • • • • • • a • • • • • • • • • • • • • 1 (Standby) : Switches the unit ON or OFF F (Function) : Selects the function.
Getting Started Front panel A Standby LED (Red) D The buttons are located on the rear. B Function LED (White) C Remote sensor Rear panel A o/p (Volume) : Adjusts volume level B USB (SERVICE ONLY) : S/W download connector. F (Function) : Selects the function.
Getting Started About LED condition Condition Description OPTICAL LED turns on. OPTICAL function is selected. Bluetooth LED turns on. Paired with Bluetooth device. Bluetooth LED blinks. Waiting for Bluetooth connection. PORTABLE LED turns on. PORTABLE function is selected. Note y When you press any button, standby LED (Red) on the main unit blinks. y When you press [ (Mute) button, standby LED (Red) blinks slowly.
Page 10
Getting Started Useful functions for using the unit Function Description To do Do this TV Remote On/ It allows you to control the Press and hold DRC ON on the remote volume of this unit by your TV control for about 2 seconds. remote control even by other (Page 16) The standby LED (Red) blinks once.
Getting Started Installing the sound bar You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. Place the unit in front of the TV and connect it to the device you want.
Connecting Connecting the AC Wireless subwoofer Adapter connection Connect the unit to the power supply with the LED indicator of wireless subwoofer supplied AC adapter. 1. Connect the supplied AC power cord to the AC LED Colour Status adapter. 2. Connect the AC adapter cable to DC IN adapter Green (Blink) The connection is trying.
Page 13
Connecting Note Manually pairing wireless subwoofer y It takes a few seconds (and may take longer) When your connection is not completed, you can for the main unit and the subwoofer to check red LED on the wireless subwoofer and the communicate with each other and make wireless subwoofer does not make sound.
Connecting Connecting to your TV Optional equipment connection Using an OPTICAL cable 1. Connect the OPT. IN jack on the back of the unit OPT. IN connection to OPTICAL OUT jack on the TV using an OPTICAL Connect an optical output jack of external devices to cable.
Connecting PORT. IN connection 3.5 mm stereo cable Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect the portable player to the PORT. IN connector of the unit by using 3.5 mm stereo cable.
Vizio y Make sure that the sound output of your TV is set to [External speaker]. y Depending on the remote control, this function may not work well. y This function does not operate on LG TV's magic remote control.
Operating Note AUTO POWER On/Off y After the unit is turned on by AUTO POWER This unit automatically turns on by an input source : function, it will be automatically turned off if Optical or Bluetooth. there is no signal for a certain period of time When you turn on your TV or an external device from the external device.
Operating Auto function change This unit recognises input signals such as Optical, Bluetooth and Portable and then changes suitable function automatically. When optical signal comes in When you turn on the external device connected to this unit by an optical cable, this unit change the function to optical.
Bluetooth device display y Available Devices : Smart phone, MP3, Notebook, depending on the type of Bluetooth device. etc.. Your unit appears as “LG SQC1 (XX)” . y Version : 4.0 Note y Codec : SBC y XX means the last two digits of Bluetooth address.
Operating Note Note y When using Bluetooth technology, you have y When the unit is not connected with to make a connection between the unit and Bluetooth device, Bluetooth LED will blink. the Bluetooth device as close as possible and y When you connect Bluetooth device (iOS keep the distance.
Operating Sound adjustment Adjust the woofer level settings You can adjust the sound level of subwoofer as your preference. Press WOOFER LEVEL o / p on the remote control Setting the surround mode to adjust woofer level. This system has two pre-set surround sound fields. Note You can select a desired sound mode by using each When the subwoofer level reaches maximum...
Troubleshooting Troubleshooting General PROBLEM CAUSE & CORRECTION y Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn them on again. The unit does not y Disconnect the power cord of this unit and the connected external device work properly.
Troubleshooting PROBLEM CAUSE & CORRECTION Check the details below and adjust the unit according to them. y Switch [ON] state of DRC function to [OFF] by using remote controller. y With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on When you feel the TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.
Appendix Specifications General Refer to the main label. Power consumption Networked standby : 0.5 W y Model : A931-230087W-M21 y Manufacturer : Dongguan Aohai Technology Co.,Ltd. AC adapter y Input : 100 - 240 V ~ 50/60 Hz y Output : 23.0 V 0 0.87 A Dimensions (W x H x D) Approx.
Appendix Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean y Do not use volatile liquids such as insecticide spray near the unit.