Bosch FLEXIDOME panoramic 5100i IR Installation Manual page 14

Hide thumbs Also See for FLEXIDOME panoramic 5100i IR:

Table of Contents

en | Installation

Notice!

If you need more space for cables, NDA-U-CBB provides additional space underneath the

camera for wiring and cables.

2022-10 | V02 | F.01U.385.630

Mark the positions of the screw holes on the surface.

Note: For standard installation, use the mounting holes marked with a B on the mounting

plate. For a different installation, for example for an installation on an electrical box, use

different mounting holes. For more information, refer to the table above.

Pull the cable through the center hole of the mounting plate.

Note: If the cable is not coming out the wall, but along the wall, then the mounting plate

needs to be installed in line with the cable. That way the cable won't come through the

center hole. The mounting plate has one side available for side entry of a cable. Remove

the door on the camera base.

If you are installing on a concrete wall/ceiling, use an appropriate size drill and screws.

Note: Allow 15-50 cm (6-20 inch) cable length to ensure proper installation and to

prevent excessive cable length. If you are using 4S box or installing on wood, this step is

not needed.

NDA-U-CBB

Installation manual

FLEXIDOME panoramic 5100i IR

15 - 50cm

(6 - 20")

Bosch Security Systems B.V.

Table of Contents