Table of Contents
Advertisement
2. Installation Work
2. Installation Work
[Before Installation]
(1) This packing contains the following parts.
Name
Appearance
Qty.
▲The manual quantity maybe one in some regions.
(2) When arranging the advanced color wired remote controller and other
controllers vertically, place them at least 2 inches(50mm) apart.
[Installation Procedures]
(1) Insert the edge of the slotted screwdriver into the groove at the bottom of the holding bracket, push and turn
the slotted screwdriver to separate and remove the controller from the holding bracket.
NOTE:
•
Do not insert the slotted screwdriver into the tab part beside the groove. The tab may be damaged and the
advanced color wired remote controller cannot be installed.
4
CIW03-H
Operation Manual
1
Groove Part
Installation & Maintenance
2
▲
Slotted
Screwdriver
Figure Seen from Bottom Side
Holding Bracket
Tabs for Attaching Controller
Screw
Manual
M4 × 16mm
2
▲
more than 2 inches(50mm)
Approx. 1/4 inches(6mm)
2
A16381TMF2
Advertisement
Table of Contents
