Table of Contents
Advertisement
1.4
General Specification
The table below shows the general specifications of the validator.
System
Enclosure
CPU Module
Base Board Module
Card Reader/Writer
Barcode Reader
Touch screen display
External Interface
Speaker
Power
System Manual – SAM-OCU-14 – 2013.12.05
Copyright ⓒ 2013 Samsung SDS Co., Ltd. All rights reserved | Confidential
Item
Dimension(mm)
Material
Processor
Memory
OS
WiFi/Bluetooth Module
GPS module
CPU
Program Memory
Data Memory
SRAM
Display
Communication
RF I/F
Standard
Input Power
SAM
Image Sensor
Target Distance
Symbologies
5.7 inch
Resolution: 640 * 3(RGB) * 480
Touch method: 4-wire resistive
USB 2.0 Host * 1
LAN * 1
RS232/485 * 2
CAN interface * 1
Antenna port *2
Rated Input Power
Input voltage (V)
Table 1 General specification
- 9 -
Specification
193.0(W) * 319.0(H) * 61.5(D)
Outside steel of enclosure :
Material: PC-ABS
Samsung S5PV210, Cortex-A8 1GHz
RAM: 512MB, NAND Flash: 512MB
ANDROID 4.0
IEEE802.11b/g/n, Bluetooth 3.0+HS
GPS RX Sensitivity: -164dBm
GPS Accuracy: 3m
STM32F417Zxx, ARM Cortex-M4
1024KBytes Flash Memory
192KBytes SRAM + BACK UP(4KBytes)
512KBytes (model : CS18LV40963ECR70)
LED for Display – 4EA (Green, Blue, Red, Yellow)
LED for Debug – 1EA (Red)
LED for Power – 2EA (Red)
RS232 * 2
PN512
SIC9310
RC-S940
ISO14443 A/B, FeliCa, Mifare, ISO15693
12V, 300mA
SIM socket 8EA
CMOS Sensor, Max. 752*480, 8-bit grayscale
5~32.5Cm: Depends on code size
1/2 Dimensional
1W, 8ohm
24 VDC
Advertisement
Table of Contents
