Advertisement
Introduction
Congratulations on your purchase of the Motorola homesight™ siren accessory. Your siren will work with
any homesight device in conjunction with a triggered event. When your system is armed, the Wireless Siren
provides a piercing audible alarm in response to an event detected by other sensors in your system (for
example, if the back door is opened in the middle of the night). It will even provide audible feedback (a chirp)
when a sensor is triggered, as well as a visible strobe light. This Quick Start Guide describes how to set up
and troubleshoot your homesight siren accessory.
Controlling Your Siren
Using your computer and Wireless System Controller, you use the Siren to react to specific events that are
triggered by other homesight devices.
How It Works
The Siren accessory enables you to signal an audible alert to an event being monitored. If, for example, you
are monitoring an area for motion and this is detected, the siren can be configured to sound when the area
event takes place. In this example, the motion sensor is triggered, the information relayed to the Wireless
System Controller, which activates the siren to sound, alerting you to the event audibly.
Controller
Package Contents
Siren
Hardware
Discovery
Mounting
Tool
Kit
2
Advertisement
