Warning - Sony Airpeak S1 Startup Manual
Hide thumbs
Also See for Airpeak S1:
- Specifications (2 pages) ,
- Help manual (123 pages) ,
- Integration manual (12 pages)
Table of Contents
Advertisement
Owner's Record
Record the model and serial number (which are located
on the product) in the space provided below. Refer to
these numbers whenever you call your Sony dealer
regarding this product.
• Aircraft:
Model No.
Serial No.
• Remote Controller:
Model No.
Serial No.
WARNING
• No user serviceable parts inside. Do not disassemble
or modify. This may cause a fire, electric shock, or
malfunction. For repair or maintenance services,
contact Sony Customer Support.
• Do not touch or get close to propellers when product is
in operation.
IMPORTANT SAFETY INSTRUCTIONS
– SAVE THESE INSTRUCTIONS AND REFER TO
THEM WHEN OPERATING THE PRODUCT
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS
Aircraft/Gimbal
NOTICE
• Before operating the aircraft, ensure the aircraft is
registered with the Federal Aviation Administration and
the registration number is appropriately displayed.
• Before operating the aircraft, ensure the operator has
passed any relevant test and received any relevant
certification from the Federal Aviation Administration.
• Always yield the right of way to other aircraft.
• Do not operate the aircraft in a careless or reckless
manner.
• Report any collision, damage or injury to relevant
authorities as required by law, regulation or ordinance.
• This product is designed for uses permitted by the
Federal Aviation Administration. Any modification for
improper use is prohibited.
• Do not use or store the products in a place exposed
to smoke, steam, humidity, or dust. This may cause
malfunction, fire or electric shock.
4
• Do not let water or foreign objects get inside the
product. This may cause a fire or electric shock. If
water or foreign objects get inside the product, turn it
off immediately, and disconnect the power cord and
connection cables.
• Do not use any battery charger(s) other than the one
included or a battery charger, manufactured and/or
recommended by Sony.
• Use only the dedicated Sony manufactured battery
packs for the aircraft. Use of a different battery pack
may cause fire or electric shock.
• Do not use the product with wet hands. This may cause
an electric shock.
• Turn off the power and remove the battery packs from
the aircraft before cleaning.
• Firmly connect the connectors.
– Do not insert metal objects into the connector ports.
This may short-circuit the pins and cause a fire.
– Insert the connectors straight into the ports. If the
connectors are inserted at an angle, the pins may
short-circuit, causing a fire.
• Disconnect the connection cables before moving
the product. Otherwise, the connection cable may
be damaged, resulting in a fire or electric shock, or
connected equipment may fall or topple over, causing
injuries.
• Remove the battery packs from the aircraft before
moving the aircraft.
• Be sure to remove the gimbal after use. Leaving it
attached to the aircraft may damage the damping
rubber of the damping plate.
• Do not place or store the product in a location
exposed to direct sunlight or close to a heater. It is
recommended that you store the product at an ambient
temperature of 18 °C (64 °F) to 30 °C (86 °F).
• Do not insert foreign objects or other items into the air
inlet or the air vent. This may cause product failure or
injuries.
• Do not subject the product to strong impacts. If you
apply excessive force to the product, such as by putting
a heavy object on top of it, dropping it, or stepping on
it, this may cause an injury or product failure.
• Keep the product away from infants and young
children. If a person accidentally touches the moving
parts of the product while it is in operation, this may
cause damage to the product or injuries.
• Do not touch the landing gear while the aircraft is in
use, and do not turn on the aircraft while an operator
(s) is touching the landing gear. These actions may
damage the aircraft or cause injuries such as pinched
fingers.
• Be careful not to touch the motor and its surrounding
parts as they become hot after use. There is a risk of
burns.
Advertisement
Table of Contents
