Table of Contents
Advertisement
Individual louver setting screen is displayed.
5 Press " " to select the individual louver.
6 Press " " to select the louver angle.
7 Press " " to save the setting and return to the home screen.
The louver angle is changed as follows.
8 Press " " (On/Off) once, or press " " for 3 seconds to end the operation during the setup
and return to the home screen.
7.4.2 Cancel Individual Louver Setting
1 Press
" " to select the louver angle and
2 Press " " to save the setting and return to the home screen.
7.5 Sleep Mode Setting
This function is used to get the air conditioner operation sleep-friendly.
• When the sleep mode starts, "Off Timer" will be set.
• After the sleep mode operates for a period of time, the set temperature will change according
to the selected operating mode, as indicated in the table below.
After 1 hour (*1)
Cool Mode
Increase 1°C (*2)
Heat Mode
Decrease 2°C (*3)
Other Modes
(*1). After an hour or when the room temperature reaches the setting temperature for the first time.
(*2). For Cool Mode, the upper limit of the setting temperatura is 28°C.
PMEN0630 rev.0 - 07/2022
set the louver to " ".
After 2 hours
Increase 1°C again (*2)
Decrease 2°C again (*3)
The setting temperature will not change
Individual
Louver
Louver
Angle
After more than 2 hours
Not change
7
24
Advertisement
Table of Contents
