Product overview
3.3 Hardware properties
View of the module
The figure below shows the CPU 1518‑4 PN/DP MFP.
Figure 3-2 CPU 1518‑4 PN/DP MFP
NOTE
Protective film
Note that there is a removable protective foil on the display when the CPUs are delivered.
Properties
The CPU 1518‑4 PN/DP MFP has the following properties:
Property
CPU display
Supply voltage
22
Description
All CPUs of the SIMATIC S7‑1500 product series feature a
display with plain text information. The display provides
information on order numbers, firmware version and
serial numbers of all connected modules.
In addition, you can set the IP address of the CPU and
make additional network settings. The display shows
error messages directly as plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC
S7-1500 Display Simulator are shown on the display.
The 24 V DC supply voltage is fed via a 4-pin plug located
on the front of the CPU.
Additional information
•
S7‑1500, ET 200MP system manu
al
(https://support.industry.siemens.
com/cs/ww/en/view/59191792)
•
SIMATIC S7‑1500 Display Simulat
or
(https://support.industry.siemens.
com/cs/ww/en/view/109761758)
•
Section Connecting up (Page 37)
•
S7‑1500, ET 200MP system manu
al
(https://support.industry.siemens.
com/cs/ww/en/view/59191792)
CPU 1518-4 PN/DP MFP (6ES7518-4AX00-1AB0)
Equipment Manual, 11/2022, A5E40882737-AC