Related Manuals for HP 85108A
Summary of Contents for HP 85108A
- Page 1 All manuals and user guides at all-guides.com System Manual HP 85108A Pulsed-RF Network Analyzer System ABCDE...
- Page 2 All manuals and user guides at all-guides.com Notice Restricted Rights Legend.
-
Page 3: Limitations Of Warranty
All manuals and user guides at all-guides.com CERTIFICATION Hewlett-Packard Company certi es that this product met its published speci cations at the time of shipment from the factory. Hewlett-Packard further certi es that its calibration measurements are traceable to the United States National Institue of Standards and Technology (NIST, formerly NBS), to the extent allowed by the institute's calibration facility, and to the calibration facilities of other International Standards Organization members. - Page 4 All manuals and user guides at all-guides.com...
- Page 5 All manuals and user guides at all-guides.com Contents 1. System and Documentation Overview 2. System Installation...
- Page 6 All manuals and user guides at all-guides.com 3. Operation...
- Page 7 All manuals and user guides at all-guides.com 4. Speci cations and Performance Veri cation 5. Adjustments 6. System Service and Troubleshooting...
- Page 8 All manuals and user guides at all-guides.com 7. Replaceable Parts A. Glossary of Pulsed-RF System Terms B. Hardware and Instrument States...
- Page 9 All manuals and user guides at all-guides.com C. Loading the System Con guration Disk Index...
- Page 10 All manuals and user guides at all-guides.com Figures...
- Page 11 All manuals and user guides at all-guides.com...
- Page 12 All manuals and user guides at all-guides.com Tables...
- Page 13 All manuals and user guides at all-guides.com System and Documentation Overview Introduction How to Use This Manual...
- Page 14 All manuals and user guides at all-guides.com...
- Page 15 All manuals and user guides at all-guides.com System Overview...
-
Page 16: Systems Covered By This Manual
All manuals and user guides at all-guides.com Systems Covered by This Manual HP 85108 Pulsed-RF System Options... -
Page 17: Upgrade Paths
All manuals and user guides at all-guides.com Warranty Upgrade Paths HP 8510C Network Analyzer HP 8510B Network Analyzer... - Page 18 All manuals and user guides at all-guides.com...
-
Page 19: System Installation
All manuals and user guides at all-guides.com System Installation Introduction System Arrival... - Page 20 HP 83622A Synthesized Sweeper (with options 001, 003, 004, and 008) 83620-90007 HP 83624A Synthesized Sweeper (with options 003, 004, and 008) 83620-90007 Software HP 8510 Speci cations and Performance Veri cation Software (Revision A.03.01 or higher) 08510-10033 HP 85108 System Con guration Disk 85108-10007 Instrument Manual Part...
-
Page 21: Site Preparation
All manuals and user guides at all-guides.com Site Preparation Environmental Requirements Temperature C to 40 C (+41 F to 104 Relative Humidity 5% to 95% at +40 C or less (non-condensing) Up to 4600 meters (approximately 15,000 feet) Altitude... - Page 22 All manuals and user guides at all-guides.com Note Accuracy-Enhanced Measurement Requirements Accuracy Enhanced Temp. = Measurement Calibration Temp. Power Requirements System Heating and Cooling...
- Page 23 BTU/hour VA Rating Subtotal BTU/hour Subtotal Standard Equipment HP 85101 Display Processor HP 85102 IF Detector HP 85110A Test Set HP 8360 Series Synthesized Source 1360 HP 8360 Series Synthesized Source 1360 Totals : Standard System 1355VA 4607 Accessory Equipment...
- Page 24 All manuals and user guides at all-guides.com Weights and Dimensions Weight (standard system): 295.5 kg (650 lbs) Height : 160 cm (63 inches) Width : 60 cm (23.6 inches) Depth : 90 cm (31.4 inches) Anti-Static Precautions Handle only at static-safe workstations. CAUTION Unpacking the System Cabinet...
- Page 25 All manuals and user guides at all-guides.com...
- Page 26 All manuals and user guides at all-guides.com...
- Page 27 All manuals and user guides at all-guides.com...
- Page 28 All manuals and user guides at all-guides.com...
-
Page 29: System Configuration
Item HP 8510B,C option 008 Network Analyzer HP 85110 S-parameter Test Set HP source (RF)(select one from the table below) HP source (LO) (select one from the table below) LO + HP 8349B Microwave amp HP 8340B HP 83623A HP 8340B... -
Page 30: System Cabling
All manuals and user guides at all-guides.com System Cabling Installing a Computer Making Connections The HP-IB Bus The HP 8510 System Bus Connecting a Plotter... - Page 31 All manuals and user guides at all-guides.com Accessory ac Power Outlet CAUTION The HP 85108 Installed In a Different Cabinet...
- Page 32 All manuals and user guides at all-guides.com...
- Page 33 All manuals and user guides at all-guides.com...
- Page 34 All manuals and user guides at all-guides.com...
-
Page 35: System Turn On
All manuals and user guides at all-guides.com System Turn On Turn On System Power HP-IB Addresses NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN HP-IB ADDRESSES SYSTEM NNNNNNNNNNNNNN MORE Instrument HP-IB Addresses HP 8510 System Bus Source #1 (RF) Source #2 (LO) HP 85110 RF Switch Initial Trace... - Page 36 All manuals and user guides at all-guides.com Firmware Revision...
-
Page 37: Operation
All manuals and user guides at all-guides.com Operation Introduction System Description... - Page 38 All manuals and user guides at all-guides.com HP 85110 S-Parameter Test Set Operation...
-
Page 39: Controlling Multiple Test Sets
All manuals and user guides at all-guides.com Controlling Multiple Test Sets... -
Page 40: Operational Tests
All manuals and user guides at all-guides.com Operational Tests... -
Page 41: Instrument State
All manuals and user guides at all-guides.com Operational Test Procedure NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNN INSTRUMENT STATE RECALL >... - Page 42 All manuals and user guides at all-guides.com...
- Page 43 All manuals and user guides at all-guides.com...
- Page 44 All manuals and user guides at all-guides.com...
- Page 45 All manuals and user guides at all-guides.com...
- Page 46 All manuals and user guides at all-guides.com...
- Page 47 All manuals and user guides at all-guides.com...
-
Page 48: Pulse Measurements Overview
All manuals and user guides at all-guides.com Pulse Measurements Overview Pulsed-RF S-parameters versus Frequency. - Page 49 All manuals and user guides at all-guides.com Pulse Pro le Domain.
- Page 50 All manuals and user guides at all-guides.com Making Pulsed-RF Measurements Frequency Domain (Point-in-Pulse) NNNNNNNNNNNNNNNNNNNNNNNNNNNNN FREQUENCY DOMAIN SYSTEM NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG DETECTOR: WIDE BW...
- Page 51 All manuals and user guides at all-guides.com NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE OUT: HIGH PULSE OUT: LOW NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE WIDTH NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DUTY CYCLE NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE TRIGGER MODE TRIGGER DELAY STIMULUS MENU...
- Page 52 All manuals and user guides at all-guides.com Pulse Profile Domain...
- Page 53 All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN CORRECTION OFF NNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN FREQUENCY STEP DOMAIN STIMULUS MENU START NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE PROFILE MARKER NNNNNNNNNNNNNNNNNNNNNNNNNNNNN FREQUENCY DOMAIN NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG DETECTOR: WIDE BW SYSTEM NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE EDIT LIST STIMULUS MENU NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
-
Page 54: Frequency List
All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE PROFILE DOMAIN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN FREQUENCY LIST SINGLE SEGMENT STIMULUS MENU... - Page 55 All manuals and user guides at all-guides.com...
-
Page 56: Pulse Out: High
All manuals and user guides at all-guides.com NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG PULSE OUT: HIGH SYSTEM NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG PULSE WIDTH SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DUTY CYCLE... - Page 57 All manuals and user guides at all-guides.com STOP STOP MARKER...
- Page 58 All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN CORRECTION OFF FREQUENCY or PULSE PROFILE DOMAIN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNN CORRECTION ON CAL SET n...
- Page 59 All manuals and user guides at all-guides.com Pulsed-RF Applications Pulsed-RF Timing Information...
- Page 60 All manuals and user guides at all-guides.com Measurement Cycle Times 1 ms Next Average 4 to 8 ms Next Parameter 30 to 40 ms Next Frequency Point (Frequency Domain) 3-4 ms Next Time Point (Pulse Pro le Domain) Measurement Cycle Time Sweep Time Pulse Width Duty Cycle Limit...
- Page 61 All manuals and user guides at all-guides.com...
- Page 62 All manuals and user guides at all-guides.com Using External Triggering and Pulse Modulation...
- Page 63 All manuals and user guides at all-guides.com...
-
Page 64: Trigger Mode
All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE PROFILE DOMAIN MARKER NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE TRIGGER MODE TRIGGER DELAY STIMULUS MENU =MARKER NNNNNNNNNNNNNNNNNNNNNNNNNNNNN FREQUENCY DOMAIN... - Page 65 All manuals and user guides at all-guides.com High Power Measurements Caution...
- Page 66 All manuals and user guides at all-guides.com...
- Page 67 All manuals and user guides at all-guides.com Note...
- Page 68 All manuals and user guides at all-guides.com...
- Page 69 All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN POWER MENU ATTENUATOR PORT: 1 ATTENUATOR PORT: 2 STIMULUS MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNN USER 1 a1 PARAMETER MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNN USER 4 b1 NNNNNNNNNNNNNNNNNNNNNNNNNNNNN USER 3 a2 NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN REDEFINE PARAMETER DRIVE DRIVE: PORT 2 NNNNNNNNNNNNNNNNNNNNNNNNNNNNN USER 2 b2...
-
Page 70: Display Data
All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DATA MEMORY DISPLAY NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DATA MEMORY DISPLAY NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DISPLAY: DATA DISPLAY NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SELECT DEFAULTS DEFAULT to MEMORY: 2... - Page 71 All manuals and user guides at all-guides.com...
- Page 72 All manuals and user guides at all-guides.com...
- Page 73 All manuals and user guides at all-guides.com Specifications and Performance Verification Introduction...
- Page 74 All manuals and user guides at all-guides.com...
-
Page 75: Required Equipment
HP Vectra personal computer or AT-compatible computer. The computer must have 2 megabytes of available memory (after HP BASIC has been loaded) for the performance veri cation program to run. Verifying Non-Standard Systems... -
Page 76: Performance Verification Procedure
All manuals and user guides at all-guides.com Recommended Performance Verification Cycle Generating System Specifications NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SYSTEM SPECS Performance Verification Procedure Connect the Computer and Warm Up the System " NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN HP-IB CONFIGURE USR PRESET Load BASIC and BIN Files... - Page 77 All manuals and user guides at all-guides.com CONTINUE Run the Specifications and Performance Verification Software RETURN ENTER RETURN/ENTER RETURN/ENTER NNNNNNNNNNNNNNNNNNNN RESUME HP 8510 Speci cation and Performance Veri cation Software RETURN/ENTER...
- Page 78 All manuals and user guides at all-guides.com Note NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PROGRAM RESET Calibration kit and its disk Veri cation kit and its disk...
- Page 79 VERIFY SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SERIAL NUMBERS NNNNNNNNNNNNNN DONE NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SYSTEM CAL NNNNNNNNNNNNNNNNNNNN RESUME NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PRIOR MENU Measurement Calibration Note HP 8510B Network Analyzer NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN INSTRUMENT STATE SAVE USER PRESET *8 NNNNNNNNNNNNNN NNNNNNNNNNNNNN LOAD MORE NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MACHINE DUMP NNNNNNNNNNNNNNNNNNNNNNNNNNNNN LOAD FILE...
-
Page 80: Power Levels
All manuals and user guides at all-guides.com Note Power Levels Source 1 NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG DETECTOR : NORMAL BW SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN POWER MENU POWER SOURCE 1 +8dBm STIMULUS MENU Source 2 NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNN POWER MENU POWER SOURCE 2 +20 dBm STIMULUS MENU... - Page 81 All manuals and user guides at all-guides.com Power Slope NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN POWER MENU POWER SLOPE SLOPE SRC 1 ON STIMULUS MENU Frequency Offset NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE EDIT MULT. SRC DEFINE: SOURCE 2 SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN OFFSET FREQUENCY NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE MULT.
-
Page 82: Select Standard
All manuals and user guides at all-guides.com Measure the Verification Standards NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SELECT STANDARD NNNNNNNNNNNNNN DONE NNNNNNNNNNNNNNNNNNNN RESUME NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MEASURE DATA NNNNNNNNNNNNNNNNNNNNNNNNNNNNN PRINT ALL Note General Characteristics... - Page 83 Trigger Level Trigger Width The minimum pulse width to be applied to the rear panel input of the HP 8510 for the HP 8510 to make a measurement. (External trigger mode: 100 nanoseconds). The minimum time span of the x-axis Minimum Time Delay of the HP 8510 display in pulse pro le mode: 5 nanoseconds.
- Page 84 All manuals and user guides at all-guides.com...
- Page 85 All manuals and user guides at all-guides.com...
- Page 86 All manuals and user guides at all-guides.com...
-
Page 87: Equipment Required
HP 3324A, 3325, 8340/41B, 8360 series (CW sinewave, 20.1 Mhz, -10 to -15 dBm) Test Cable 85111-60001 (required for the adjustment procedure, included in the HP 85111A/B upgrade kits) Adapters Type-N (m) to BNC (f) 1250-0780 SMA (m) to BNC (m) 1250-1787... - Page 88 All manuals and user guides at all-guides.com A3/A4 Pulse Detector Adjustment Note...
- Page 89 All manuals and user guides at all-guides.com Note NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE PROFILE DOMAIN...
- Page 90 All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNN USER 2 b2 PARAMETER MENU RESPONSE REF VALUE MARKER RESPONSE SCALE NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN RESET IF CORRECTION SYSTEM NNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN NUM PTS STIMULUS MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN RESET IF CORRECTION < NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN RESET IF CORRECTION Note NNNNNNNNNNNNNNNNNNNNNNNNNNNNN USER 3 a2 NNNNNNNNNNNNNNNNNNNNNNNNNNNNN...
- Page 91 All manuals and user guides at all-guides.com...
- Page 92 All manuals and user guides at all-guides.com...
- Page 93 All manuals and user guides at all-guides.com System Service and Troubleshooting Introduction Getting Help Troubleshooting Troubleshooting Strategy...
- Page 94 All manuals and user guides at all-guides.com Documentation Required 1. Note the Symptoms of the Failure 2. Check System Setup...
- Page 95 See your disk drive HP-IB bus manual for HP-IB addresses: address switch location HP 8510 716 (decimal) Will be checked after the system is powered HP 8360 Series Source Check Software Revision, Language, and HP-IB Address MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN HP-IB MENU NNNNNNNNNNNNNNNNNNNNNNNNNN ANALYZER...
- Page 96 All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNN ADRS MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNN 8360 ADRS SHIFT LOCAL...
- Page 97 All manuals and user guides at all-guides.com 3. Use Error Messages and Internal Diagnostics ENTRY OFF...
- Page 98 HP 8360 series line power Instr Check HP-IB status BLINKING HP 85110 line power HP 85102 line power CHANNEL 1 CHANNEL 2 Refer to the HP 8510C power on sequence in the Network Analyzer Startup Problems section.
- Page 99 All manuals and user guides at all-guides.com > 4. Use Specific Procedures for Certain Symptomatic Failures...
- Page 100 All manuals and user guides at all-guides.com Network Analyzer Startup Problems =MARKER =MARKER NNNNNNNNNNNNNNNNNNNNNNNNNNNNN LOAD FILE...
- Page 101 All manuals and user guides at all-guides.com Unratioed Power Level Check Procedure Note NNNNNNNNNNNNNN NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN LOAD MORE MACHINE DUMP DISC TAPE/DISC...
-
Page 102: Power Source
All manuals and user guides at all-guides.com NNNNNNNNNNNNNNNNNNNNNNNNNNNNN LOAD FILE Setting Source 1 Power Level NNNNN RECALL NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE POWER MENU POWER SOURCE 1 MENU NNNNN SAVE NNNNN NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE POWER MENU RECALL MENU NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN POWER SOURCE 1 NNNNN SAVE Signal Path Check... - Page 103 All manuals and user guides at all-guides.com a2 path CHANNEL 2 b1 path NNNNN RECALL b2 path CHANNEL 2...
- Page 104 All manuals and user guides at all-guides.com...
- Page 105 All manuals and user guides at all-guides.com HP 85108 IF/Detector Option 008 Pulsed-RF IF Path Troubleshooting Flowchart...
- Page 106 All manuals and user guides at all-guides.com...
- Page 107 All manuals and user guides at all-guides.com...
-
Page 108: Factory Preset
All manuals and user guides at all-guides.com Procedure 1: Service Adapter Test NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN MORE FACTORY PRESET STEP RECALL MARKER MENU MENU... - Page 109 All manuals and user guides at all-guides.com Step Connections/setup Conclusion (if the problem is corrected) Move W55 cable on A11J5 to A11J6. replace A11 IF Mixer board Move W46 cable on A2J7 to A2J1. replace W55 (A11J5 to A2J1) If b2 IF signal is okay. replace A2 pulse IF Mux board Return to the pulsed-RF troubleshooting owchart.
- Page 110 All manuals and user guides at all-guides.com Step Connections/setup Conclusion (if the problem is corrected) Move W46 cable on A13J5 to A13J6. replace A13 IF Mixer board Move W45 cable on A2J7 to A2J5. Rede ne a1 to: DRIVE: Port 2. replace W46 (A13J5 to A2J5) Rede ne a1 to: DRIVE: Port 1.
- Page 111 All manuals and user guides at all-guides.com Step Connections/setup Conclusion (if the problem is corrected) Swap cables W50 & W51. If the problem was in the ref. (a1 & a2) path, replace W50. If the problem was in the test (b1 & b2) path, replace W51. Move W51 on A2J2 to A2J6.
- Page 112 All manuals and user guides at all-guides.com...
- Page 113 All manuals and user guides at all-guides.com Figure 6-7. HP 85108A Block Diagram...
- Page 114 All manuals and user guides at all-guides.com...
- Page 115 All manuals and user guides at all-guides.com...
- Page 116 All manuals and user guides at all-guides.com...
-
Page 117: Replaceable Parts
All manuals and user guides at all-guides.com Replaceable Parts Introduction Ordering Information To Order Parts ..fast! - Page 118 All manuals and user guides at all-guides.com...
-
Page 119: Cable Assemblies
Cable Assembly A8J6-A2J4 85102-60171 Cable Assembly A9J5-A2J3 85102-60172 Cable Assembly A4J2-A16J1 85102-60170 Cable Assembly A11J5-A2J1 DOCUMENTATION (NOT PICTURED) 85108-90023 HP 85108 System Manual 08510-90275 HP 8510 Operating & Service Manual 83624-90001 HP 8360 Series Manual Set 85110-90001 HP 85110 Test Set Manual... -
Page 120: Touch-Up Paint
All manuals and user guides at all-guides.com HP Part Description Desig Number TOUCH-UP PAINT 6010-1146 Dove Gray - Use on the frame around the front panel and painted portions of front handles. 6010-1147 French Gray - Use on the side, top and bottom covers. - Page 121 All manuals and user guides at all-guides.com...
- Page 122 BNC Cable, 48 inch 85108-20028 Semi-Rigid RF Cable 85108-20029 Semi-Rigid RF Cable 1250-1894 Adapter Male N-Male SMA 5062-4071 Rack Mount Kit 85101-80098 HP 8510 Operating & Service Firmware 85108-10003 HP 85108 System Con guration Disk 08510-10033 HP 8510 Performance Veri cation Software...
- Page 123 All manuals and user guides at all-guides.com Glossary of Pulsed-RF System Terms Introduction Pulse Repetition Period, PRP Pulse Repetition Frequency, PRF P RF P RP Duty Cycle...
-
Page 124: Rise/Fall Time
All manuals and user guides at all-guides.com Pulse Width Rise/Fall Time Trigger Delay Pulse Profile Measurement Resolution Period... - Page 125 All manuals and user guides at all-guides.com...
- Page 126 All manuals and user guides at all-guides.com...
- Page 127 All manuals and user guides at all-guides.com Hardware and Instrument States Introduction HP-IB Addresses HP 8510 HP-IB Address HP-IB Address System Bus During Pulsed-RF During 2nd Test Set Operation Operation Test Set RF switch Address of 8510 System bus Source #1 (RF)
- Page 128 Int. Int. Leveling Source #2 Int. Sweep Mode STEP or FRQ LIST Set source #2 power leveling to Ext. if an HP 8349B ampli er is used to amplify the LO signal. Instrument States System Parameter Pulsed-RF Power Source #1 +8 dBm...
- Page 129 All manuals and user guides at all-guides.com Examining Your Pulse Hardware and Instrument States Check HP-IB Addresses NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN HP-IB ADDRESS SYSTEM Check Multiple Source Settings NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE EDIT MULT.SRC. SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DEFINE SOURCE 1 NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MULTIPLIER NUMER. NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MULTIPLIER DENOM.
- Page 130 All manuals and user guides at all-guides.com Note NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN POWER SOURCE 2 NNNNNNNNNNNNNN STEP MENU NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE PULSE CONFIG DETECTOR: WIDE BW NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN PULSE OUT: HIGH NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNN MORE SYSTEM PHASELOCK NONE SYSTEM NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN MORE POWER LEVELING SYSTEM NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN SOURCE1: INTERNAL...
- Page 131 Single Normal BW nonpulsed-RF mode This con guration requires a single source, and a test set that provides an LO signal such as the HP 8514, 8515, 8516, or 8517. Refer to the HP 8510C documentation for a con guration diagram. Procedure...
- Page 132 All manuals and user guides at all-guides.com...
- Page 133 All manuals and user guides at all-guides.com Index a1 and a2 signal path check, 6-10 fall time, A-2 addresses rmware revision, 2-18 HP-IB, 2-17, 6-3, B-1 frequency domain adjustment frequency list, 3-17 pulse detector, 5-2 frequency domain (point-in-pulse), 3-14 adjustments...
- Page 134 3-4 sequence option 001, 3-3 calibration, 3-36 options, 1-4 measurement, 3-36 overview service adapter test, 6-16 document, 1-1 setting HP-IB addresses, 6-3 pulse measurements, 3-12 signal conditioning system, 1-3 external, 3-30 signal path changing, 3-33 parts signal path check, 6-10...
- Page 135 All manuals and user guides at all-guides.com unratioed power levels, 6-9 voltages, 2-5 upgrades, 1-5 user parameters, 3-33 warranty, iii, 1-5 weight, system, 2-6 width, cabinet, 2-6...
- Page 136 All manuals and user guides at all-guides.com...