Siemens DMS8000 MP4.81 Operation Manual page 41
Hide thumbs
Also See for DMS8000 MP4.81:
- Application & planning (96 pages) ,
- Applications and planning manual (76 pages) ,
- Manual (46 pages)
Table of Contents
Advertisement
Building Technologies
CPS Fire Safety
Note: The value to set in the Vitality Timer depends on the type of network. The
following rule applies:
- In Cerloop network, the MK7022 already handles the vitality check, and the
DMS host does not receive the heartbeat messages. In this case, set the timer
value = 0.
- In NK8000 and CDI-Net networks, if the connection also includes the MK7022
Cerloop interface, leave the value = 0. In the case of a link without MK7022, the
vitality check is required and the timer should be set to a value > 0.
Importing the DMS7000 configuration
1. Select the CZ12 node.
2. Select Tools > Import in the Composer menu to start CZ12 import.
a The software presents a browsing window to search for the files to import.
3. Using standard Windows controls, do the following:
–
Look for DMS files, selecting the extension TXT in the browsing window.
–
Locate the DMS7000 text metafile.
–
Select the file and click Open.
–
When prompted, select the language of the text file.
–
If more than one CZ12 unit is present in the metafile, the software presents
a list. Select the one you want to import.
a In a few moments, the CZ12 structure is imported, and the node is represented
in the Composer tree.
Importing the LMSmodular configuration
1. Select the CZ12 node.
2. Select Tools > Import in the Composer menu to start CZ12 import.
a The software presents a browsing window to search for the files to import.
3. Using standard Windows controls, do the following:
–
Look for LMS files, selecting the extension DBF in the browsing window.
–
Locate the DB_SUB.DBF file.
–
Select the file and click Open.
–
When prompted, select the language of the DBF file.
–
If more than one CZ12 unit is present in the metafile, the software presents
the complete list. Select the one you want to import and click OK.
a In a few moments, the CZ12 structure is imported, and the node is represented
in the Composer tree.
Defining the CZ12 physical configuration
If you were not able to import the configuration, you will need to configure the CZ12
by hand to reflect the actual hardware configuration. The following list shows where
different items are located in the physical and logical trees in Composer.
- Logical tree:
- Intrusion sections
- Sections
- Burglary zones
Configuring intrusion control units
Configuring a CZ12
A6V10359489_a_en
2
41
30.09.2016
Hide quick links:
Advertisement
Table of Contents
