Page 2
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
K562e Quick Start-02 1 Product Overview Product Overview Huawei OptiXstar K562e is an edge router (AX3000Mbps Wi-Fi 6 Edge ONT) that supports dual-band Wi-Fi 6. It provides users with gigabit broadband access using Ethernet/Wi-Fi uplink technologies. Description of Indicators Indicator...
Page 5
STB, and to a WAN port when connected to the LAN port of an Internet gateway. Reset When the K562e is starting, use a needle-shaped object to button press and hold this button for more than 2 seconds until all indicators turn off.
Page 6
1 Product Overview NO TE ● The K562e can only be used indoors. It can be mounted onto a wall or be placed horizontally on a desktop. Do not install it in other modes, such as on the ceiling. ● Keep a clearance of more than 10 cm around the device to ensure proper ventilation.
Network Expansion 2.1 Wireless Network Expansion When you already have Wi-Fi in your home and need to expand the Wi-Fi coverage, you can use the WPS button to connect the K562e to the existing Wi-Fi network. NO TICE ● This section assumes that your home network supports WPS features. If your home network does not support WPS features, you can log in to the K562e web page to configure parameters and expand Wi-Fi.
After the WLAN and Internet indicators of the K562e turn steady blue, the K562e is connected to the Internet. Move the K562e to a room where you need to expand Wi-Fi and power it on. After the Internet indicator turns steady blue, Wi-Fi is expanded successfully.
Page 9
If your home gateway is a Huawei smart gateway (consult your device provider for more information), the Wi-Fi SSID and password of the gateway will be automatically synchronized to the K562e, and there is no need to reset the Wi-Fi parameters of the K562e.
What can I do if a problem occurs when I set the Internet access mode in a wired network expansion scenario? You can check the indicator status of the K562e. If the indicator is steady red, Internet access is unavailable.