Page 1
Washer dryer WD14U561TR User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
Page 2
Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Sensors ....44 Intended use Unbalanced load detection system . 44 This appliance is intended for private ■ I n t e n d e d u s e domestic use only.
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility.
Page 7
Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
Page 9
Safety instructions Certain objects may ignite Warning ■ when drying is in progress, Risk of poisoning! or even cause the appliance Poisonous fumes may be given to catch fire or explode. off by cleaning agents that Remove any lighters or contain solvents, e.g.
Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance.
Page 11
Safety instructions Repairs and any other work Warning ■ on the appliance must only Risk of injury/material be conducted by our damage/damage to the customer service or by an appliance! electrician. The same applies The use of spare parts and for replacing the mains cable accessories supplied by other (when necessary).
Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient.
Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:...
Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■...
Page 15
Positioning and connecting Keep the screws and sleeves in b) Remove the sleeves. Note: a safe place. Fit the covers. Take the hoses out of the holders. Lock the covers firmly in place by applying pressure to the snap-in hooks. Unscrew and remove all four transport brace screws.
Positioning and connecting Hose and cable lengths Connection on left side ( ~ 105 cm 0 ~ 150 cm 8 ~ 95 cm @ 60 cm ~ 100 cm Connection on right side ( ~ 60 cm 0 ~ 195 cm 8 ~ 140 cm @ 60 cm ~ 100 cm The following are available from...
Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve).
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure.
Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Incorrect levelling may result in intense Risk of death! noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a Never touch or hold the mains plug ■...
Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Tambur bakım (Drum Clean) supply hose.
Page 21
Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 Pour approx. 1 litre of water into ■ dispenser II, select the Boşaltma (Drain) programme and start.
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap...
Getting to know the appliance Control panel ( Programmes that can be selected. 0 Touch-Display 8 Start/Pause button Touch I button to start, interrupt (e.g. reload washing) and cancel the programme. @ Power button Press the # button to switch the appliance on/off.
Getting to know the appliance Touch-Display Additional programme settings Programme default settings Display Setting s (Prewash) Display Setting Description l (Rinse plus) Ž - 90° Temperature Temperature that Ý (Easy iron) can be set in °C ~ "Additional programme z (Water plus) Ž...
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■...
Detergents and care products Preparing laundry for drying Detergents and care products To ensure an even drying result, Note: sort the laundry according to the: Type of fabric Y ou can protect your appliance and ■ Care symbols which are indicated on D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the ■...
Detergents and care products Detergent recommendation This information is intended to help you to choose the right detergent for your items. Fabrics Detergent Programme Temperature Heat-resistant white fab- Standard detergent with optical Cottons From cold up to 90 °C rics made from cotton or brighteners linen Coloured fabrics made...
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max.
Page 29
Overview of programmes Programme/Type of laundry Options/Information Eko 40-60 (Eco 40-60) 10.0 kg/6,0 kg Suitable for washing normally soiled cotton,linen and mixed fab- ric textiles, and drying it to be immediately stored in a cupboard. 400 - 1400 rpm Notes z (Water plus), Ý...
Page 30
Overview of programmes Programme/Type of laundry Options/Information Narin/İpek (Delicates/Silk) 2,0 kg/- For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves). 2 - 800 rpm z (Water plus), Ý (Easy iron), l (Rinse plus), s (Prewash), â...
Page 31
Overview of programmes Programme/Type of laundry Options/Information Sıkma/Boşaltma (Spin/Drain) Single spinning program with selectable spin speed and subse- quent draining. To select the Boşaltma (Drain) program, set 2 - 1400 rpm the spin speed to 2. Ý (Easy iron), â (Memory) wash+dry è...
Page 32
Overview of programmes Programme/Type of laundry Options/Information Gömlek/Bluz (Shirts) 2,0 kg/2,0 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres Ž - 60 °C or blended fabrics. 400 - 800 rpm z (Water plus), Ý (Easy iron), l (Rinse plus), s (Prewash), â...
Programme default settings Finish in Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h increments (h = Y ou can change the default settings for hour) up to a maximum of 24 hours. P r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Additional programme settings After starting the programme (if a Ø (Iron dry): Normal, single-layered ■ “Finish in” time has been selected and laundry that still needs to be damp the programme has not yet started), you after drying and is suitable for can change the preselected number of ironing or hanging up.
Additional programme settings By selecting additional programme Ý (Easy iron) settings, you can better adapt the Reduces creasing by means of a washing/drying process to your items of special spin sequence followed by laundry. fluffing and reduced spin speed. The settings can be selected or Touch Ý...
Operating the appliance ç (Silent) Turn the water tap on. Function designed for noise reduction. Washing and drying process noise will be reduced, and ending signal will be switched off. If silent is selected for wash only, Note: remaining moisture of the laundry will be slightly increased.
Operating the appliance Adjusting the selected Selecting additional programme settings programme Select the additional programme Changing default settings settings by touching the half lit buttons in the display~ Page 35 You can use the displayed default settings or adjust the selected e.g.
Operating the appliance Notes Warning Unfold and load presorted items Eye / skin irritation! ■ of laundry. Mix large and small If the detergent drawer is opened items. Washing items of different while the appliance is running, size distribute themselves better detergent/care product may run out.
Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold I button for 1~2 seconds, then release the button. The Position the measuring aid A for programme starts and the appliance measuring the correct amount of liquid door is locked.
Operating the appliance Adding/removing laundry Cancel the programme After starting the programme (only for For programmes washing at high washing), you can add or remove temperatures: laundry if necessary. Touch the I button. To cool down laundry: Select Touch the I button. The appliance Durulama(Rinse).
Appliance settings Removing laundry/switching Appliance settings off the appliance A utomatic switch-off Press the # button till the indicator A p p l i a n c e s e t t i n g s lamp turns off, release the button. If the appliance is not operated for The appliance is switched off.
Page 43
Appliance settings End signal Brightness You can select position 1 and use the Possible setting values: 1 - 4 ˜ button to adjust the volume of the You can select position 3 and use the end signal, e.g. ‘- „. ˜...
Sensors Appliance housing/control Sensors panel U nbalanced load detection Remove the detergent residue S e n s o r s ■ system immediately. Wipe the housing and the control ■ The automatic unbalanced load panel with a soft, damp cloth. detection system detects imbalances Do not use abrasive cloths, sponges ■...
Cleaning and maintenance Detergent drawer and housing Fit the insert and lock it in place (push the cylinder onto the guide pin). If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer.
Cleaning and maintenance Drain pump is blocked Carefully unscrew the pump cover; residual water may leak out. Clean the interior, pump cover Turn the water tap off to prevent Note: thread and pump housing. The more water from flowing in and to impeller in the drain pump must be ensure that it is drained via the pump.
Cleaning and maintenance The drain hose at the siphon Clean the filters: is blocked Disconnect the hose from the rear of the appliance. Press the # button. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.
Faults and what to do about them Press the # button. Pull out the Faults and what to do mains plug. Open the service flap. about them E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g.
Faults and what to do about them Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Œ ■ Close the door, continue the programme with I button or select Boşaltma (Drain) programme.
Faults and what to do about them Display Cause/Remedy The indicator lamp of Run the Tambur bakım (Drum Clean) 90°C programme to clean and care for the the Tambur bakım drum and the outer tub. (Drum Clean) pro- Notes gramme flashes Run the programme without laundry.
Page 51
Faults and what to do about them Faults Cause/Remedy The programme has Not a fault – Some programme specifically detect and weigh the load after the started and the drum is program has started in order to calculate the optimum amount of water for rotating, but the drum is washing.
Page 52
Faults and what to do about them Faults Cause/Remedy Foam may come out of Too much detergent used? the detergent drawer. Mix 1 tablespoon of fabric softener with ½ litre of water and pour into dispenser II. (Not for outdoor, sports and down-filled textiles!) Reduce detergent dosage for the next wash cycle.
Page 53
Faults and what to do about them Faults Cause/Remedy Creasing. Creasing occurs when you have exceeded the maximum load or selected ■ the wrong program for the type of fabric. All the required information can be found in the programme overview table. Remove clothes immediately after drying;...
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e (~ "Faults and what to do about them" on page 48), please contact our after- sales service.
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512.
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 62,0 cm In addition to warranty claims against (height x width x depth)
Page 60
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001567443* 9001567443 (020525)