4. EEPROM
All adjustment data has been stored in the EEPROM.
There are two EEPROM in this camera recorder as shown in the table below.
NAME
CAMERA EEPROM
VTR EEPROM
NOTE:
To save the EVR adjustment data to the EEPROM, follow items 4-1, 4-2, and 4-3. There is also additional
data stored in this EEPROM (This EVR software can save or write only adjustment data).
NOTE:
Be sure to save both the EEPROM data into the personal computer before performing service and adjustment, in
order to avoid any accidental data loss.
4-1. How to Save Camera Adjustment Data
1. Select "Camera Check menu" In the Main menu, and then press the "Enter" key.
2. Select "3. Read (Save) / Write All EEPROM datas" in the Camera check menu, and then press the "Enter"
key.
3. Select "9. Save all data of EEPROM" in "3. Read (Save) / Write All EEPROM datas" menu, and then press
the "Enter" key.
REF. No.
IC3006 (CAMERA C.B.A.)
IC2008 (VTR C.B.A.)
ELE-11