Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
Refer to
instruction
manual
IMPORTANT! These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service instructions
or a proprietary manual to establish the correct procedure and data.
‰
WARNING! Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective Equipment
is available from your Sealey stockist.
‰
WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when using
tools.
‰
WARNING! Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown causing damage to engine.
‰
WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator / user
must apply caution and common sense (good practical sense).
8
DO NOT use tools if damaged.
8
DO NOT attempt to start or move a vehicle whilst in gear and with timing devices fitted.
9
Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair.
9
Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
9
When timing an engine, always prevent the engine from being turned over. Use a notice and / or inhibit the engine.
9
Keep children and unauthorised persons away from the work area.
9
Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
Account for all tools, parts and components being used. DO NOT leave these in or near the engine.
9
Return tools to suitable storage after use.
9
When not in use, store in a safe, dry childproof place.
2. INTRODUCTION
Comprehensive kit covers engines which are fitted to a large range of Ford, Volvo and some Mazda vehicles. Contains time-saving tooling to correctly align
the timing covers on Ford and Volvo engines, and a crankshaft pulley holder for Mazda engines. Supplied in storage case with instructions and warning tag.
3. CONTENTS
Contents
Item
Part Number
Description
1
VSE6160-01-V2
Camshaft Alignment Plate >5-11
2
VSE6160-02-V2
Camshaft Alignment Plate >5-11
3
VSE6160-03-V2
Crank Sensor Alignment Tool
4
VSE5042A.10-V2
Crankshaft Timing Pin
5
VSE6160-04-V2
Tensioner Pin (Ø2mm)
6
VSE5042-11-V2
Camshaft Sprocket Alignment Plate
7
VSE5850 -V2
Crankshaft Pulley Alignment Plate
8
VSE6160-05-V2
Crankshaft Pulley Alignment Plate
9
VSE6160-06-V2
Crankshaft Pulley Alignment Tool
© Jack Sealey Limited
TIMING TOOL KIT - FOR FORD, MAZDA, VOLVO 1.5,
1.6, 2.0 - BELT/CHAIN DRIVE
VSE6160.V2
MODEL NO:
Wear eye
protection
OEM Number
Ford
Volvo
303-1565
303-1504
999-7405
303-1521
999-7416
303-748
999-7406
303-1054
303-1097
999-7429
303-1550
999-7431/999-7415
999-7415
Original Language Version
Mazda
303-1061
303-507
205-072
VSE6160.V2
Issue:1
06/07/22
Advertisement
Related Manuals for Sealey VSE6160.V2
Summary of Contents for Sealey VSE6160.V2
- Page 1 VSE6160.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 ● The crankshaft pulley is not located with a woodruff key. ● Some applications do not have an adjuster on the auxiliary belt; (Stretch type belt) therefore a special tool such as the Sealey VS787 Stretch Belt Removal/Installation Tool will be required to remove/refit the auxiliary belt.
- Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...