Motorola AltiVec MVME5100 Series Installation & Use Manual page 37

Hide thumbs Also See for AltiVec MVME5100 Series:

Table of Contents

PPCBug Firmware

3-6

26. Verifies the configuration data that is resident in NVRAM and

displays a warning message if the verification failed.

27. Calculates and displays the MPU clock speed, verifies that the MPU

clock speed matches the configuration data, and displays a warning

message if the verification fails.

28. Displays the BUS clock speed, verifies that the BUS clock speed

matches the configuration data, and displays a warning message if

the verification fails.

29. Probes PCI bus for supported network devices.

30. Probes PCI bus for supported mass storage devices.

31. Initializes the memory/IO addresses for the supported PCI bus

devices.

32. Executes Self-Test, if so configured. (Default is no Self-Test).

33. Extinguishes the board fail LED, if Self-Test passed, and outputs

any warning messages.

34. Executes boot program, if so configured. (Default is no boot.)

35. Executes the debugger monitor (i.e., issues the PPC6-Bug>

prompt).

Computer Group Literature Center Web Site

Table of Contents