36
Settings of the Cooling Fan Transformer
The voltage transformer of the cooling fan is located at the top right-hand corner of
the drive.
Installation of Optional Modules
The optional module (fieldbus adapter, relay output extension module) is inserted in
the optional module slot of the OMIO board
manual for cable connections.
Cabling of I/O and fieldbus modules
Strain relief with
a cable tie
Installation
Set to 220 V if the supply frequency is 60 Hz. (The
voltage is set to 230 V (50 Hz) at the factory.)
Set according to the supply voltage:
380 V, 400 V, 415 V, 440 V, 480 V
Grounding wire of the outer shield
Alternative to a)
As short as possible
1
2
3
4
a)
.
See the appropriate optional module