Huawei TE30 User Manual page 32
Videoconferencing endpoint
Hide thumbs
Also See for TE30:
- Operation manual (51 pages) ,
- Product overview (50 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Service type
DSCP audio
,
DSCP video
,
DSCP data
, and
DSCP
signaling
Network
jitter
Lip sync.
Step 2 Select Save.
----End
Issue 01 (2013-03-27)
Description
Specifies how the data packets sent and
received by your TE30 are processed on
the network.
l Normal: Network devices transmit the
data packets without special
processing.
l Minimum delay: Network devices
transmit the data packets at the highest
rate with the minimum delay.
l Maximum throughput: The largest
number of data packets possible are
transmitted on the network.
l Highest reliability: The data packets
are transmitted to remote sites
completely and correctly.
l Minimum cost: Network devices
transmit the data packets at the lowest
cost.
Specify the service level for the data
packets sent by your TE30 during
transmission.
A larger value indicates a higher service
level.
Adjusts network jitter settings to address
the following:
l Lip synchronization problems during
conferences
l Choppy audio problems, by increasing
the network jitter value.
Fine-tunes network jitter settings if a
slight lip synchronization problem persists
after the network jitter settings are
adjusted.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
The default value is Minimum
delay.
Value range: 0-63
The default value is 63.
Value range: 0 ms to 1000 ms
The default value is 0ms.
Value range: 0 ms to 300 ms
The default value is 0ms.
3 Network
24
Hide quick links:
Advertisement
Table of Contents
