Settings For Tool Lists - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Tool management
12.16 Settings for tool lists
12.16
Settings for tool lists
The "Settings" window provides the following options to set the view in the tool lists:
• Display only one magazine in the magazine sorting
– You limit the display to one magazine. The magazine is displayed with the assigned
– You use a configuration to specify whether the "Magazine selection" softkey jumps to the
• Display only spindles in the buffer
In order to display during operation only the spindle location, the remaining locations of the
buffer will be hidden.
• Enable tool in/out file
– When creating a new tool, the tool data can be loaded from a file.
– When deleting or unloading a tool, the tool data can be backed up in a file.
• Activating the adapter-transformed view
– The geometry lengths and the operation offsets are displayed transformed in the tool list.
– The wear lengths and the sum offsets are displayed transformed in the tool wear list.
Procedure
...
318
buffer locations and the not-loaded tools.
next magazine or whether the "Magazine Selection" dialog for changing switches to any
magazine.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
3.
Press the "Continue" and "Settings" softkeys.
4.
Activate the checkbox for the desired setting.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
