1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. LCLG006
  6. Owner's manual

LG LCLG006 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
LG Digital Signage
( LED SIGNAGE, SYSTEM CONTROLLER)
Please read this manual carefully before operating your set
and retain it for future reference.
LCLG006
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for LG LCLG006

Summary of Contents for LG LCLG006

  • Page 1 OWNER’S MANUAL LG Digital Signage ( LED SIGNAGE, SYSTEM CONTROLLER) Please read this manual carefully before operating your set and retain it for future reference. LCLG006 www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    PREPARING ......13 - Parts and Buttons ........... 14 - Rack Installation (Optional) ........ 15 - Connecting to LCLG006 with LAN Cable ... 16 USING LCLG006 ...... 17 - Connecting to PC ............. 17 - Connecting to External Devices ....... 18 CONNECT A USB DEVICE ..

  • Page 3: Safety Precautions

    WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS The safety precautions are intended to prevent unexpected danger or harm by helping the user to use the product safely and for its intended purpose.

  • Page 4: Precautions For The Ac Adapter And Power

    • Use only the power cord or AC adapter provided or approved by LG Electronics, Inc. If you use another power cord, make sure that it is certified by the national standards. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized service center for a replacement.
  • Page 5 • If water or any foreign substance goes inside the product, disconnect the power cord immediately and contact the service center. - Otherwise, this may cause a fire or electric shock due to damage to the product. • Keep the power cord or AC adapter away from any heating devices. - The cord coating may melt and cause fire or electric shock.

  • Page 6: Precautions For Moving The Product

    Precautions for Moving the Product WARNING • Contact the service center before moving the product. - It may cause electric shock and damage the product. • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved. - You may be electrocuted or the product can be damaged.

  • Page 7: Precautions For Installing The Product

    Precautions for Installing the Product WARNING • Contact the service center before installing the product. - It can cause electric shock and damage the product. • Do not drop an object on or impact on the product. Keep out of reach of children and do not place toys or objects near the product to prevent throwing things on the product screen.
  • Page 8 CAUTION • Install the product where no Electromagnetic Interference occurs. • If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with service engineer before installing. Please do not install the product in places such as where there is an abundance of fine dust or oil mist, chemical substances are used, exposed to direct sunlight, the temperature is very high or low, the humidity is very high.

  • Page 9: Precautions For Cleaning The Product

    Precautions for Cleaning the Product WARNING • Keep the product clean at all times. - If you don’t clean the unit for a long time and it becomes covered in dust, it can cause fire or product damage. • When you need to clean the inside of the product, you must contact the service center. - Otherwise, cleaning without support may cause a fire, electric shock, or damage to the product.

  • Page 10: Precautions For Using The Product

    Precautions for Using the Product WARNING • Do not use the product in any environment with excessively high temperatures or humidity. • If you use the product for a long period of time, take a rest from time to time to protect your vision. - Extended viewing could result in impaired vision.

  • Page 11: Product Disposal

    • Do not use high voltage electrical goods near the product (e.g., a bug zapper). - This may result in product malfunction if it receives an electrical shock. • If there is a gas leak, do not touch the outlet, and open the windows for ventilation. - Otherwise, the product may cause fire or electric shock.

  • Page 12: Licenses

    LICENSES Supported licenses may differ by model. Visit www.lg.com for more information on licenses. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

  • Page 13: Assembling And Preparing

    ASSEMBLING AND PREPARING CAUTION • Always use genuine components to ensure safety and durability of the product. • The product warranty will not cover damage or injury caused by the use of unauthorized components. • Replacing the batteries with the wrong type may result in explosion. •...

  • Page 14: Parts And Buttons

    Parts and Buttons The illustrations may differ depending on the model. Explanation • Turns the power on and off. • Switches to HDMI input. • Switches to OPS input. • Switches to DP input. • Accesses/Exits White Pattern. • Consecutively accesses/exits R/G/B Pattern. •...

  • Page 15: Rack Installation (Optional)

    Rack Installation (Optional) Rack (*Not provided) NOTE • Use the bolts included in the rack to fasten the product.

  • Page 16: Connecting To Lclg006 With Lan Cable

    Connecting to LCLG006 with LAN Cable Connect the LAN cable with the set. CAUTION • Check the direction so that the LAN cable is not damaged. • Inserting the LAN cable with excessive force may damage the contact point.

  • Page 17: Using Lclg006

    USING LCLG006 Connecting to PC The LCLG006 model itself does not have any screen. You may see the screen through the LAS*´s models. LCLG006 supports the feature. : a feature that enables a PC to recognize devices attached by the user without device configuration or...

  • Page 18: Connecting To External Devices

    Connecting to External Devices Connect a HD receiver, DVD, or VCR player to the product and select an appropriate input mode. For the best picture quality, use a HDMI cable to connect the product to external devices. NOTE • For the best image quality using a HDMI connection is recommended. •...

  • Page 19: Connect A Usb Device

    CONNECT A USB DEVICE Connect a USB storage device, such as a USB flash memory to the display device to use multimedia features. CAUTION • Do not turn the Device off or remove the USB storage device when the multimedia screen is activated. This may cause the loss of a file or damage to a USB storage device.
  • Page 20 Tips for Using USB Devices • Only USB storage devices are recognized. • A USB storage device using an automatic recognition program may not be recognized. • A USB storage device which uses its own driver may not be recognized. •...

  • Page 21: Troubleshooting

    TROUBLESHOOTING No image is displayed. Problem Solution Is the power cord connected to the • Check if the power cord is correctly plugged into the power outlet. product? The ‘Unknown Product’ message appears when the product is connected. Problem Solution Did you install the driver? •...
  • Page 22 The display colour is abnormal. Problem Solution Screen has poor colour resolution (16 • Set the colour depth to more than 24 bits (true colour). To do this, colours). select (Control Panel) (Display) (Setting) (Colour Palette) on Windows. (May differ depending on your operating system (OS).) Screen colour is unstable or mono- •...

  • Page 23: Product Specifications

    PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. symbol means alternating current, and the symbol means direct current. HDMI/ DisplayPort/ OPS: 3840 x 2160 @ 60 Hz Max Resolution - This may not be supported on some OS or graphics card types.
  • Page 24 [Unit: mm (inches)] 307.5 (12.1) 443 (17.4) 483 (19.0) (2.4)
  • Page 25 HDMI/DisplayPort/OPS (PC) Support Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080 67.5 3840 x 2160 67.5 3840 x 2160...
  • Page 26 NOTE • Resolutions available for the Input Label option in HDMI/ DisplayPort/ OPS input modes. - PC resolutions: 800 x 600 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x 1080 / 60 Hz, 3840 x 2160 / 60 Hz - DTV resolutions: 480p, 720p, 1080p, 2160p • Horizontal Frequency: The horizontal interval is the time taken to display one horizontal line. When one horizontal line is divided by the horizontal interval, the number of horizontal lines displayed every second is the horizontal frequency.
  • Page 27 Supplier’s Declaration of Conformity Trade Name Responsible LG Electronics USA, Inc. Party Address 1000 Sylvan Ave Englewood The model and serial number of the product are Cliffs, NJ 07632 located on the back and on one side of the product.
  • Page 28 USER MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operation and retain it for future reference. webOS 4.0 www.lg.com...
  • Page 29 CONTENTS SETTINGS ........4 - Display .................26 [Picture Mode] - Home ..................4 [Aspect Ratio] Global Buttons [Rotation] Dashboard [Expert Controls] [Content Manager] Video Output Resolution - Ez Setting ................5 - Sound ...................33 [Video Wall] [Sound Mode] [On/Off Scheduler] [Sound Out] [SI Server Setting] [Audio Out] [Server Setting] [AV Sync Adjustment]...
  • Page 30 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices PRODUCTS ........60 are available for download. LG Electronics will also provide open source code to you on CD-ROM - Connecting cables ............60 for a charge covering the cost of performing - Communication Parameter ........61...

  • Page 31: Settings

    NOTE • Software-related content may be changed without prior notice due to upgrades of the product functions. • Some features described in the User Manual may not be supported in certain models and countries. • SNMP 2.0 is supported. SETTINGS Home Global Buttons •...

  • Page 32: Ez Setting

    Ez Setting [Video Wall] [Ez Setting] [Video Wall] Set Video Wall options to create a wide visual canvas. • [Tile Mode]: Turn [Tile Mode] on or off. • [Tile Mode Settings]: Display a single integrated screen on multiple Signage monitors. •...

  • Page 33: [Server Setting]

    NOTE • To use these features, an account (ID/PASSWORD) for webOS Signage developer website (http://webossignage. developer.lge.com/) is required. [Server Setting] [Ez Setting] [Server Setting] Set up to connect your signage to a SuperSign server. • CMS Server • Control Server [Fail Over] [Ez Setting] [Fail Over]...

  • Page 34: [Status Mailing]

    [Status Mailing] [Ez Setting] [Status Mailing] This feature configures the system so that the status of the device is assessed and then notified to the administrator by e-mail. • [On/Off]: Turns [Status Mailing] on or off. • [Mailing Option], [Scheduling]: Sets the email sending interval. •...

  • Page 35: [Play Via Url]

    [Play via URL] [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. • [URL Loader]: Turns [Play via URL] on or off. • [Set URL]: Enter the URL address to display automatically. •...

  • Page 36: [Signage 365 Care]

    [Signage 365 Care] [Ez Setting] [Signage 365 Care] You can install the Signage 365 Care (fault diagnosis) solution for fault diagnosis and prediction service. • [Install]: Installs the Signage 365 Care solution. 1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the Signage 365 Care solution. - Account Number: The number assigned when the Signage 365 Care solution is registered.

  • Page 37: [Multi Screen]

    [Multi Screen] [Ez Setting] [Multi Screen] This feature allows you to view multiple external inputs and videos on a single screen. PIP Mode PBP Mode 3-Screen Split Mode 4-Screen Split Mode...
  • Page 38 2-Screen Split Mode (1:1) 3-Screen Split Mode (1:1:1) 3-Screen Split Mode (1:2:1) 4-Screen Split Mode (1:1:1:1) NOTE • In multi-screen mode, the DP daisy chain feature is not supported. • The available number/shape of split screens may vary depending on the model. Selecting Screen Layout When you enter multi-screen mode without having set any screen layout, the screen layout selection menu appears.
  • Page 39 Changing Screen Input Press the button on the top right of each split screen to select the desired input. NOTE • Inputs which have already been selected for other split screens cannot be selected again. To select them, press the RESET button to reset the inputs for all screens first.

  • Page 40: General

    General [Language] [General] [Language] You can select the menu language to be displayed on the screen. • [Menu Language]: Sets the language of your Signage monitor. • [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System Information] This feature displays information such as the device name, software version, and storage space.
  • Page 41 [Power] [General] [Power] Power-related feature settings [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. • You can set this option to [On] or [Off]. • If you set this feature to [On], the product turns off after it’s remained in No Signal status for 15 minutes. •...
  • Page 42 [PM Mode] • [Power Off (Default)]: Set the normal DC off mode. • [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal Shut Down mode. • [Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), Off Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's Power button or the monitor's Off button.
  • Page 43 [Power Indicator] • This function enables you to change the [Power Indicator] settings. • Setting to [On] will turn on [Power Indicator]. • Setting to [Off] will turn off [Power Indicator]. • Regardless of [On] or [Off] settings in [Power Indicator], [Power Indicator] will be turned on for approximately 15 seconds.
  • Page 44 [LAN Daisy Chain] • LAN Daisy Chain forms a daisy chain of LAN ports so that even if you connect only one monitor set to a network, the other sets in the daisy chain are connected to the network. • However, the first monitor set in the daisy chain must be connected to the network through a port that is not used for the daisy chain connection.
  • Page 45 For details, contact your ISP. • LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment.
  • Page 46 Tips for When Configuring Wireless Network Settings • The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices.
  • Page 47 [Safety Mode] [General] [Safety Mode] Set to this function for safe performance. [ISM Method] If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. [Mode] •...
  • Page 48 [Start Time] • Set the Start time. • This option is available only when [Repeat] is set to [Schedule]. • You cannot set the same time for Start time and End time. [End Time] • Set the End time. • This option is available only when [Repeat] is set to [Schedule].
  • Page 49 This option enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (On/Off Toggle): enables the Beacon feature. • The LG Beacon/iBeacon/Eddystone Type Beacon features are supported. • iBeacon - Beacon UUID (hex): Set the UUID. 1. Field1: 4byte hex value (8 digits) 2.
  • Page 50 2.4GHz. • When you set iBeacon, LG Beacon will be set to be the same as the value of iBeacon field. But the LG Beacon setting item won’t be provided separately.
  • Page 51 [SIMPLINK Setup] • When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. • [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
  • Page 52 [Crestron] • This function enables synchronization with applications provided by Crestron. • Server: Server: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron). • Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794.

  • Page 53: Display

    Display [Picture Mode] [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. • [Mall/QSR], [Transportation], [Education], [Gov./Corp.]: Display the picture optimally for your installation environment. • [Normal]: Display the picture at normal contrast, brightness, and sharpness. •...
  • Page 54 [Customize] • [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to 100, the brighter the screen is. • [OLED Light]: Adjusts the brightness of the LED panel to control the brightness of the screen. •...
  • Page 55 • [Picture Option]: Customize the picture options. - [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. - [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. - [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen. (Recommended settings based on input signals: Backlight 0 - 255 High, RGB 16 - 235: Low, YCbCr: Low) - [Real Cinema]: Optimize the video image for a cinematic look.

  • Page 56: [Aspect Ratio]

    [Aspect Ratio] [Display] [Aspect Ratio] This feature enables you to change the picture size to view the picture at its optimal resolution. • [Full Wide]: Stretch the picture to fill the screen. • [Original]: Display the picture at its original resolution. [Rotation] [Display] [Rotation]...

  • Page 57: [Expert Controls]

    [Expert Controls] [Display] [Expert Controls] [UHD Deep Color] If you connect an HDMI, DP, or OPS device to one of the Deep Color adjustable ports, you can select between UHD Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu. If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz, set the Deep Color option back to Off.
  • Page 58 Item Description [Tiling Type] Select and set the mode according to the installation type of your Signage. • Stand-alone: Select and use this mode when you use only one unit. • Video Wall: Select and use this mode when using two or more multi-screen configurations.

  • Page 59: Video Output Resolution

    [Energy Saving] • [Smart Energy Saving]: Automatically adjust the brightness of the screen according to the brightness of the picture to save energy. - [On]: Enable the Smart Energy Saving feature. - [Off]: Disable the Smart Energy Saving feature. • [Brightness Control]: Adjust the brightness of the screen to save energy.

  • Page 60: Sound

    Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. • [Standard]: This sound mode works well for content of all types. • [Cinema]: Optimize sound for watching movies. •...

  • Page 61: [Sound Out]

    Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned • It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.

  • Page 62: [Audio Out]

    [External Speaker] (0~15): Adjust the sync between video and audio coming from external speakers, such as those connected to the digital audio output port, LG audio equipment, or headphones. The larger the number is, the slower the voice output is than the default value.

  • Page 63: Admin

    Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.

  • Page 64: [Change Password]

    [Change Password] This feature enables you to set the password you use to enter the Installation menu. (The default password: 000000) Enter your current password. Enter a new 6-digit password. Enter the same password again in the Confirm Password field for confirmation. [Enterprise Settings] •...

  • Page 65: Content Manager

    CONTENT MANAGER Web Login • Different features are supported depending on the product. This Signage product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •...
  • Page 66 [Delete] Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. Select the content you wish to delete. Click [Delete] in the upper right-hand corner of the screen. You can see that the content has been deleted.
  • Page 67 [Scheduler] (Scheduler) The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] Click [New Schedule] in the upper right-hand corner of the screen. Choose between [Playlist] and [Input Source]. 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of.
  • Page 68 [Delete Schedule] Click [DELETE] in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click [DELETE]. Check that the schedules have been deleted. [Calendar View] When you have registered schedules, click [Calendar View]. You can see that the schedules registered are displayed in the form of a timetable. [Distribute] Click [Distribute] in the upper right-hand corner of the screen.
  • Page 69 Supported Photo & Video Files NOTE • Subtitles are not supported. • The photo feature is not supported in OLED model. Supported video codecs Extension Codec .asf, .wmv Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) .avi...
  • Page 70 Supported Photo File Formats File type Format Resolution .jpeg, .jpg, .jpe JPEG • Minimum: Min: 64 x 64 • Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) .png • Minimum: Min: 64 x 64 •...
  • Page 71 • If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. • If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •...

  • Page 72: Group Manager 2.0

    Group Manager 2.0 This feature enables you to group together multiple monitor sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device.
  • Page 73 [GROUP MANAGEMENT] • Creating a New Group 1. Click [Add New Group]. 2. Enter a group name. 3. Click [Add Device], select the devices you wish to add to the group, and add them. 4. Click [Done], and you will see that a new group has been created. •...
  • Page 74 [Setting Data Cloning] Select your desired group and click Clone. Check that the data have been copied on the slave sets. [Content Distribute] Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click [Distribute].

  • Page 75: Screenshare

    “Devices” on your laptop. Click “Add Device” in the top center of the screen, and then you will see a list of nearby WiDi-capable LG Signage monitors. From the list of detected Signage monitors, select one you wish to connect to and click Connect.

  • Page 76: Lg Presenter

    This feature is to display the PC (Windows or Mac OS) screen on the Signage monitor with wired/wireless connection to the PC. To use this feature, you need to install LG Presenter PC Client (“Client”) on the PC. You can use LG Presenter in the following ways.

  • Page 77: Connect

    Connect On Signage [LG Presenter] On PC Go to www.lge.com/LGP to download the Client. Install and run the downloaded Client. Enter the username you want and press the button. When the list of Signage devices found in the network appears, select the one you want to connect to.

  • Page 78: Screen Share

    Screen Share Select the screen you want to share and press the Share button. To leave Screen Share, press the Stop button. Item Description Connection status It shows the currently connected user's name and you can also disconnect here. Screen list It shows the list of PC screens available to share.

  • Page 79: Handover

    If you approve the request for hand over, the Signage device will be disconnected, and the Client on PC2 will be connected to the Signage device. If you deny the request for hand over, the Signage device will remain connected, so you can continue to use the features of LG Presenter. Item Description...

  • Page 80: Management Tools

    MANAGEMENT TOOLS Admin Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function • [Dashboard]: Display a summary of the product's status and provides links to each page. •...

  • Page 81: Picture Id

    Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each RS-232C IN RS-232C IN RS-232C IN...

  • Page 82: To Control An External Pc Using Touch Screen

    TO CONTROL AN EXTERNAL PC USING TOUCH SCREEN • This only applies to certain models. Connecting to a PC Connecting this product to a PC with a USB cable (Type A to Type B) allows you to control the connected PC by touching the screen of the product.

  • Page 83: Smart Calibration

    SMART CALIBRATION How to Run [Smart Calibration] Set the Set ID of each set. Select the [Picture Mode] to execute Smart Calibration. After selecting the [Calibration] mode, you can set [Color Temperature]. - [Optimal Target]: Set the optimal color value of the installed set as the target. - Please set the target to 3,000K in the broadcasting station environment.

  • Page 84: [Manual Calibration]

    [Manual Calibration] You can manually adjust the color of the selected location. • [Screen Split]: Set the manual adjustment area. • [Calibration Position]: Select the manual adjustment location. Screen Split: 4, Calibration Position: 3 Screen Split: 9, Calibration Position: 5...

  • Page 85: Ir Code

    IR CODE • All models do not support the HDMI/USB function. • Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button (Power) MONITOR ON Remote control button MONITOR OFF Remote control button (Energy Saving) Remote control button INPUT (Select input)
  • Page 86 Code (Hex) Function Remarks Tile Remote control button Exit Remote control button Picture ID On (red) Remote control button Picture ID Off (green) Remote control button Yellow Remote control button Blue Remote control button W.Bal Remote control button (S.Menu) Remote control button (Home) Remote control button Swap...

  • Page 87: Controlling Multiple Products

    CONTROLLING MULTIPLE PRODUCTS • This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •...

  • Page 88: Communication Parameter

    Communication Parameter NOTE • When using 3-wire connections (non-standard), an IR Baud Rate: 9600 BPS daisy chain cannot be used. Data Length: 8 bits • Be sure to only use the provided gender to connect Parity Bit: None properly. Stop Bit: 1 bit •...

  • Page 89: Command Reference List

    Command Reference List Command Data (Hexadecimal) [Power] 00 to 02 Select Input See Select Input [Aspect Ratio] See [Aspect Ratio] [Brightness Control] 00 to 04 [Picture Mode] See [Picture Mode] [Contrast] 00 to 64 [Brightness] 00 to 64 [Sharpness] 00 to 32 [Color] 00 to 64 [Tint]...
  • Page 90 Command Data (Hexadecimal) [Software Version] [White Balance] Red Gain 00 to FE [White Balance] Green Gain 00 to FE [White Balance] Blue Gain 00 to FE [White Balance] Red Offset 00 to 7F [White Balance] Green Offset 00 to 7F [White Balance] Blue Offset 00 to 7F [Backlight]...
  • Page 91 Command Data (Hexadecimal) [Power On Status] 00 to 02 Wired [Wake On LAN] 00 to 01 [Screen Rotation] 00 to 03 [Time Sync] n, 16 00 to 01 [Contents Sync] 00 to 01 [LAN Daisy Chain] n, 84 00 to 01 [External Input Rotation] n, 85 00 to 03...
  • Page 92 Command Data (Hexadecimal) [Digital Audio Input] n, a2 00 to 01 [Booting Logo Image] n, a3 00 to 01 [SoftAP] n, a4 00 to 01 [Natural Size] n, a5 00 to 64 Play Saved Internal Media n, a8 See Playback of Saved Internal Media [No Signal Image] n, a9 00 to 01...

  • Page 93: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes. * (Command2): This command is used to control the monitor. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to FFH) under Settings in the OSD menu.
  • Page 94 01. [Power] (Command: k a) Acknowledgment (b)( )(Set ID)( )(OK/NG)(Data)(x) Controls the power on/off status of the monitor. * Some input signals may not be available for all models. Transmission * If it is not distributed from SuperSign W, WebOS Player (k)(a)( )(Set ID)( )(Data)(Cr) returns NG.
  • Page 95 06. [Contrast] (Command: k g) 10. [Tint] (Command: k j) Adjusts the screen contrast. Adjusts the screen tints. Transmission Transmission (k)(g)( )(Set ID)( )(Data)(Cr) (k)(j)( )(Set ID)( )(Data)(Cr) Data 00-64: Contrast 0-100 Data 00-64: Tint Red 50-Green 50 Acknowledgment Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) (j)( )(Set ID)( )(OK/NG)(Data)(x) 07.
  • Page 96 13. [Sound Mode] (Command: d y) 16. [Current Time] 1 (year/month/day) (Command: f a) Selects a sound mode. Sets the Clock 1 (year/month/day) values and Auto Time. Transmission Transmission (d)(y)( )(Set ID)( )(Data)(Cr) 1. (f)(a)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data 01: [Standard] 2.
  • Page 97 18. [No Signal Power Off(15Min)] (Command: f g) 21. [Default] Settings (Command: f k) Sets the monitor to enter Automatic Standby mode if there is Executes Reset. no signal for 15 minutes. (Initialize Screen can only be executed in RGB input mode.) Transmission Transmission (f)(g)( )(Set ID)( )(Data)(Cr)
  • Page 98 24. Time Elapsed (Command: d l) 27. [White Balance] Red Gain (Command: j m) Displays the time that has elapsed after your monitor has Adjusts the red gain value for white balance. turned on. Transmission Transmission (j)(m)( )(Set ID)( )(Data)(Cr) (d)(l)( )(Set ID)( )(Data)(Cr) Data 00-FE: Red Gain 0-254...
  • Page 99 30. [White Balance] Red Offset (Command: s x) 33. [Backlight] (Command: m g) Adjusts the red offset value for white balance. Adjusts the backlight brightness. Transmission Transmission (s)(x)( )(Set ID)( )(Data)(Cr) (m)(g)( )(Set ID)( )(Data)(Cr) Data 00-7F: Red Offset 0-127 Data 00-64: Backlight 0-100 FF: Checks red offset value...
  • Page 100 36. [Tile Mode] Check (Command: d z) 39. [DPM] (Command: f j) Checks the tile mode. Sets the DPM(Display Power Management) function. Transmission Transmission (d)(z)( )(Set ID)( )(Data)(Cr) (f)(j)( )(Set ID)( )(Data)(Cr) Data FF: Check Tile Mode Data 00: [Off] 04: 1 minute Acknowledgment 05: 3 minutes...
  • Page 101 42. [Fail Over] Mode (Command: m i) 44. Remote Control Key Lock (Command: t p) Selects a sound mode. Configures the settings of the product's remote control key. Transmission Transmission (m)(i)( )(Set ID)( )(Data)(Cr) (t)(p)( )(Set ID)( )(Data)(Cr) Data 00: [Off] Data 00: Unlocks all keys 01: [Auto]...
  • Page 102 46. Status Check (Command: s v) Data 09 (when checking the fan speed) Checks the current signal of the product. Acknowledgement Transmission (v)( )(Set ID)( )(OK/NG)(Data)(Data1_1)(Data1_2) (s)(v)( )(Set ID)( )(Data)( )(FF)(Cr) …(DataN_1)(DataN_2)(x) Data 02: Check whether there is a signal Data1_1:00~ff: First fan speed top 1 Byte 03: The monitor is currently in PM Mode Data1_2: 00~ff: First fan speed bottom 1 Byte...
  • Page 103 48. [PM Mode] (Command: s n, 0c) 50. [Network Setting] (Command: s n, 80 or 81 or Sets the PM mode. Configures network and DNS settings. Transmission Transmission (s)(n)( )(Set ID)( )(0c)( )(Data)(Cr) (s)(n)( )(Set ID)( )(Data1)( )(Data2)( ) Data 00: [Power Off] (Basic) (Data3)( )(Data4)( )(Data5)(Cr) 01: [Sustain Aspect Ratio]...
  • Page 104 51. [Power On Status] (Command: t r) 54. [Time Sync] (Command: s n, 16) Sets the Power On status of the monitor. Sets Time Sync. Transmission Transmission (t)(r)( )(Set ID)( )(Data)(Cr) (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: [LST(Last Status)] Data 00: [Off] 01: [STD(Standby)]...
  • Page 105 57. [External Input Rotation] (Command: s n, 85) 60. [Brightness Scheduling] (Command: s s) Sets the External Input Rotation feature. Sets Brightness Scheduling. Transmission Transmission (s)(n)( )(Set ID)( )(8)(5)( )(Data)(Cr) (s)(s)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data 00: [Off] Data1 01: 90 degrees 1.
  • Page 106 61. [Multi Screen] Mode & Input (Command: x c) 62. [Aspect Ratio] (Multi screen) (Command: x d) Saves and controls Multi Screen modes and inputs. Controls the aspect ratio of Multi Screen. Transmission Transmission (x)(c)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4) (x)(d)( )(Set ID)( )(Data1)( )(Data2)(Cr) ( )(Data5)( )(Cr) Data1 01: Controls the Main input...
  • Page 107 65. Stop Video (Command: k x) 69. [Holiday Setting] (Command: s n, 9b) Controls Stop Video. Sets holidays. Transmission Transmission (k)(x)( )(Set ID)( )(Data)(Cr) 1. (s)(n)( )(Set ID)( )(9)(b)( ) (Data1)( )(Data2)( )(Data3)( ) Data 00: The Stop Video feature is on. (Data4)( )(Data5)( )(Data6)(Cr) 01: The Stop Video feature is off.
  • Page 108 70. [ISM Method] (Command: s n, 9c) 3. Deleting a Schedule E0: Deletes all holiday schedules Sets UPnP.mode. E1: Deletes the 1st holiday schedule Transmission E2: Deletes the 2nd holiday schedule (s)(n)( )(Set ID)( )(9)(c)( )(Data)(Cr) E3: Deletes the 3rd holiday schedule Data 00: [Off] E4: Deletes the 4th holiday schedule...
  • Page 109 73. [Wi-Fi Lock] (Command: s n, 9f) 75. See [Backup via Storage] (Command: s n, a1) Sets Wi-Fi Lock. Sets Backup via Storage. Transmission Transmission (s)(n)( )(Set ID)( )(9)(f)( )(Data)(Cr) 1. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Cr) 2. (s)(n)( )(Set ID)( )(a)(1)( )(Data1)(Data2)(Cr) Data 00: Wi-Fi Unlock 01: Wi-Fi Lock...
  • Page 110 76. [Digital Audio Input] (Command: s n, a2) 79. [Natural Size] (Command: s n, a5) Sets Digital Audio Input. Sets the Natural Size feature. Transmission Transmission (s)(n)( )(Set ID)( )(a)(2)( )(Data)(Cr) (s)(n)( )(Set ID)( )(a)(5)( )(Data)(Cr) Data 00: Digital Data 00-64: Natural Size 0 - 100 01: Analog Acknowledgment...
  • Page 111 82. [Audio Out] (Command: s n, aa) 85. [Apply to all inputs] (Command: n, 52) Sets Audio Out to Off/Variable/Fixed. Apply the video mode and low value of the current input to the same video value of all inputs. Transmission Transmission (s)(n)( )(Set ID)( )(a)(a)( )(Data)(Cr) (s)(n)( )(Set ID)( )(5)(2)( )(Data)(Cr)
  • Page 112 87. [Time to OFF] Scheduling (Command: f e) 3. 01h to 0ch (Timer Power On days setting) 02: Repeat Daily Sets Off Timer settings. 03: Repeat from Monday to Friday Transmission 04: Repeat from Monday to Saturday (f)(e)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) 05: Repeat from Saturday to Sunday Data1 06: Repeat on Sunday...
  • Page 113 88. Novastar Control (Command: s n, b8) 91. Change Setid (Command: j x) It controls the Novastar device. Changes and checks Setid. 1. When it is a general LED model Transmission (s)(n)( )(Set ID)( )(b)(8)( )(Data1)(Data2)(Cr) Transmission (j)(x)( )(Set ID)( )(Data1)( )(Data2)(Cr) Data1 00: novastar power 01: novastar brightness Data1 Data2 : 00 01 ~ 03 e8 (1~1000)
  • Page 114 94. [UHD Deep Color] (Command: s n, af) 96. [Input Manager] (Command: s n, b1) It sets the UHD Deep Color mode for each input. It sets labels by input. Transmission Transmission (s)(n)( )(Set ID)( )(a)(f)( )(Data1)( )(Data2)(Cr) (s)(n)( )(Set ID)( )(b)(1)( )(Data1)( )(Data2)(Cr) Data1 70: DVI-D Data1 90: HDMI1 90: HDMI1...
  • Page 115 99. [Scan Inversion] (Command: s n, 87) 102. Read Brightness Value (Command: m u) Checks the brightness value. It controls the on/off status of Scan Inversion. Transmission Transmission (m)(u)( )(Set ID)( )(FF)(Cr) (s)(n)( )(Set ID)( )(8)(7)( )(Data)(Cr) Data 00: Off 01: On Acknowledgment (u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3)(Data4)
  • Page 116 105. [HDR Picture Mode] (Command: s n, c4) 108. [USB2 to HDBaseT] (Command: s n, c3) Selects a HDR Picture Mode. Sets USB2 to HDBaseT. Transmission Transmission (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) (s)(n)( )(Set ID)( )(c)(3)( )(Data)(Cr) Data 00: Mall/QSR Data 00: [Off] 01: General...

Table of Contents