Removing The Center Control Cover - Dell Studio 1555 Service Manual

Hide thumbs Also See for Studio 1555:

Table of Contents

Back to Contents Page

Center Control Cover

Dell Studio™ 1555 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

WARNING:

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

surface (such as a connector on the back of the computer).

CAUTION:

is not covered by your warranty.

CAUTION:

inside the computer.

Removing the Center Control Cover

1. Follow the procedures in

2. Remove the screw securing the center control cover from the battery bay.

3. Turn the computer over and open the display as far as possible.

4. Pry out the center control cover with a plastic scribe starting from the battery bay location at the back of the computer.

5. Ease the center control cover up.

center control cover

Great user manuals database on

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

To avoid electrostatic discharge, ground yourself by using a wrist= grounding strap or by periodically touching an unpainted metal

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

To help prevent damage to the system board, remove the main battery (see

Before You

Begin.

UserManuals.info

Before Working Inside Your

Computer) before working

Table of Contents