Siemens SIMATIC S7-1500 System Manual page 110
Automation system
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
Special considerations: CPU as bus device
For the operation of a CPU, the following requirements must be noted:
● PROFIBUS interface (for CPU 1516-3 PN/DP and CPU 1518-4 PN/DP)
● PROFINET interface
S7-1500 Automation System
System Manual, 02/2014, A5E03461182-AB
– The integrated PROFIBUS interface of the CPU is configured using STEP 7
(participant IP address and bus parameters configured).
– The CPU is connected to the subnet.
– The terminating resistors at the segment boundaries are switched on.
See the PROFIBUS Function Manual
(http://support.automation.siemens.com/WW/view/en/59193579)
– The integrated PROFINET interface of the CPU is configured using STEP 7
(IP address and device name configured).
– The CPU is connected to the subnet.
See the PROFINET Function Manual
(http://support.automation.siemens.com/WW/view/en/49948856)
Commissioning
9.3 Commissioning procedure
109
Advertisement
Table of Contents
