1. Manuals
  2. Brands
  3. GE Manuals
  4. Dryer
  5. DCVH680EJWW
  6. Installation instructions manual

GE DCVH680EJWW Installation Instructions Manual

Electric dryer
Hide thumbs Also See for DCVH680EJWW:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Installation
Instructions
PEDESTALS FOR DRYERS
(comes with individual installation instructions)
Three models available:
- SBSD137H

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT-
IMPORTANT-
Note to Installer -
Note to Customer -
TOOLS YOU
WILL NEED
SLIP JOINT PLIERS
FLAT BLADE SCREWDRIVER
PHILLIPS SCREWDRIVER
LEVEL
Questions on Installation? Call: 800.GE.CARES (US)
- SBSD107H
- SBSD227F
4" DIA. METAL DUCT
(RECOMMENDED)
4" DIA. FLEXIBLE METAL (SEMI-RIGID)
UL LISTED TRANSITION DUCT
(IF NEEDED)
KIT WX08X10077 (INCLUDES 2 ELBOWS)
4" DIA. FLEXIBLE METAL (FOIL TYPE)
UL LISTED TRANSITION DUCT (IF NEEDED.)
www.GEAppliances.com (US)
WARNING
RISK OF FIRE
NOTE: Installation and service of this dryer requires basic
mechanical and electrical skills. It is your responsibility
to contact a quali ed installer to make the electrical
connections.
MATERIALS YOU WILL NEED
4" DUCT
4" DIA. METAL
CLAMPS (2)
ELBOW
OR
4" SPRING
CLAMPS (2)
DUCT TAPE
4" COVER PLATE (IF NEEDED
(KIT WE1M454)

Electric Dryer

01
SAFETY
EXHAUST
GLASSES
HOOD
3/4" STRAIN
RELIEF
GLOVES
UL RECOGNIZED
234D1582P001 31-16680 03-12 GE
DRYER POWER
CORD KIT
(NOT PROVIDED
WITH DRYER)
UL RATED
120/240V,30A
WITH 3 OR 4 PRONGS.
IDENTIFY THE PLUG
TYPE AS PER THE
HOUSE RECEPTACLE
BEFORE PURCHASING
LINE CORD.

Advertisement

Table of Contents
loading

Related Manuals for GE DCVH680EJWW

Summary of Contents for GE DCVH680EJWW

  • Page 1: Electric Dryer

    Installation Instructions Questions on Installation? Call: 800.GE.CARES (US) PEDESTALS FOR DRYERS (comes with individual installation instructions) Three models available: - SBSD107H - SBSD137H - SBSD227F BEFORE YOU BEGIN Read these instructions completely and carefully. IMPORTANT- IMPORTANT- Note to Installer -...

  • Page 2: Mobile Home Installation

    3/4", UL RECOGNIZED WIRE STRAIN RELIEF 4 #10 AWG MINIMUM COPPER CONDUCTORS OR 120/240V 30A POWER SUPPLY CORD KIT MARKED FOR USE WITH DRYERS & PROVIDED WITH CLOSED LOOP OR SPADE TERMINALS WITH UPTURNED ENDS (NOT SUPPLIED). NEVER LEAVE THE...

  • Page 3: Exhaust Information

    NEUTRAL (White) 3 #10 AWG MINIMUM COPPER COVER CONDUCTORS OR 120/240V 30A POWER SUPPLY CORD KIT MARKED FOR USE WITH DRYERS & PROVIDED WITH CLOSED LOOP OR SPADE TERMINALS WITH UPTURNED ENDS (NOT SUPPLIED). 3-wire Connection WARNING: NEVER LEAVE THE COVER OFF OF THE TERMINAL BLOCK.

  • Page 4: Exhaust Connection

    Installation Instructions SEALING OF JOINTS INSULATION EXHAUST CONNECTION WARNING - TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY: THIS DRYER COMES READY FOR REAR EX- HAUSTING. IF SPACE IS LIMITED, USE THE INSTRUCTIONS IN STEP 9 TO EXHAUST DIRECTLY FROM THE SIDE OR BOTTOM OF THE CABINET.

  • Page 5: Alcove Or Closet Installation

    Installation Instructions UL-LISTED FLEXIBLE METAL (FOIL-TYPE) TRANSITION DUCT For best drying performance LEVELING YOUR DRYER LEVEL LEVEL FRONT-TO-BACK SIDE-TO-SIDE 4 LEVELING LEGS ALCOVE OR CLOSET INSTALLATION MUST EXHAUST INFORMATION NOTE: WHEN THE EXHAUST DUCT IS LOCATED AT THE REAR OF THE DRYER, MINIMUM CLEARANCE FROM THE WALL IS 5.5 in.
  • Page 6 MOBILE OR MANUFACTURED HOME INSTALLATION GARAGE INSTALLATION (IF ALLOWED BY LOCAL CODES) DRYER EXHAUST TO RIGHT, LEFT OR BOTTOM CABINET WARNING - BEFORE PERFORMING THIS EXHAUST INSTALLATION, BE SURE TO DISCONNECT THE DRYER FROM ITS ELECTRICAL SUPPLY. PROTECT YOUR HANDS AND ARMS FROM SHARP EDGES WHEN WORKING INSIDE THE CABINET.

  • Page 7: Important Notes

    Installation Instructions ADDING ELBOW FOR EXHAUST THROUGH BOTTOM OF CABINET CAUTION: DUCT TAPE Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard. CAUTION: Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard.

  • Page 8: Before You Start

    BEFORE YOU START REMOVE DOOR ASSEMBLY Remove the four screws. NOTE: 2 #8 Machine Screws 6 #10 Large Screws 2 #8 Machine Screws...
  • Page 9 Installation Instructions REMOVE HINGE REINSTALL HINGE ASSEMBLY IMPORTANT:...
  • Page 10 Installation Instructions REINSTALL NUTS AND HINGE COVER REASSEMBLE DOOR ASSEMBLY IMPORTANT:...
  • Page 11 Installation Instructions REINSTALL DOOR ASSEMBLY MOVE STRIKE BRACKET SERVICING WARNING- LABEL ALL WIRES PRIOR TO DISCONNECTING WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND DANGEROUS OPERATION AFTER SERVICING/INSTALLATION. www.GEAppliances.com...
  • Page 12 Installation Instructions ROUGH-IN DIMENSIONS 27" 31 1/8" 1 5/8" 41 1/2" 4 1/2" 11 3/4" 27" 30 5/8" 40 1/4" 39 1/8" 53 5/8" 17" 13 3/8" 11 3/4"...

This manual is also suitable for:

Gfdn110elww

Table of Contents