■
Never immerse the appliance in water and protect it from water spray or drip-
ping water.
■
The housing must only be cleaned with a soft damp cloth and a mild detergent.
■
Use a standard commercial limescale remover to remove limescale from the
appliance. You must also observe the manufacturer's information for your
limescale remover.
■
Unscrew the closure cap
with limescale remover and let it act upon the limescale until it has been dissolved.
Pour out the limescale remover. Rinse the closure cap
with clean water.
■
Wipe off limescale deposits inside the base unit
ticularly important to clean the heat converter
■
Remove the protective cap of the heating element
ment
element
■
Remove the aroma pouch
water. Hold the aroma pouch
times to rinse it out. All parts must then be thoroughly dried.
Maintenance
Replacing the silver-ion ball filter
NOTE
►
The silver-ion ball filter
►
To prevent the silver-ion ball filter
replacing it annually.
►
To order new silver-ion ball filters, please read the section entitled Ordering
replacement parts.
♦
Remove the water tank
♦
Remove the silver-ion ball filter
♦
Insert a new silver-ion ball filter.
♦
Use the handle
SULA 45 A1
for the water tank
with a slightly damp cloth. Fit the protective cap back onto the heating
.
from the tray
prevents the germs in the water from multiplying.
from the base unit
to place the water tank
. Fill the entire water tank
with a damp cloth. It is par-
.
and wipe the heating ele-
. Rinse the tray
under running water and squeeze it several
from becoming ineffective, we recommend
using the handle
.
onto the base unit
and the water tank
under running
.
.
GB │ MT
│
49
■