Advertisement
installation steps
1. Mount the device on a DIN rail inside an approved enclosure.
2. If a CAT5 network cable is being used on site terminate in the 5 way screw connector as shown bellow.
3. When connecting flat cable, ensure that the recommended wiring connection is followed crimping on the RJ12 socket,
Re check the wire colours after crimping the RJ12 socket to ensure wires have located correctly on the right plug pins.
4. Plug RJ12 into any one of the 22 RJ12 sockets. .
product specifications
Network connections
22 x RJ12 network sockets, 1 x 5 way screw terminal
Compliance:
CE, C-Tick
Operating Environment:
0º to 50ºC ambient temperature, 0% to 95% RH non condensing
Construction:
Polycarbonate DIN rail enclosure, 12 units wide
Dimensions:
H 93mm x W 211mm x D 75mm
Weight:
Packed weight 0.94kg
Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333
E-Mail:
All manuals and user guides at all-guides.com
DDPB22RJ12 Installation Manual Rev A.doc Specifications subject to change without notice
dynalite.info@philips.com
Dynalite:
Web: Philips.com/dynalite
DYNET-SFLAT6-CALBE
Advertisement
