Table of Contents
Advertisement
Maintenance
EMU42642
Installing propeller
EWM00770
WARNING
On counter rotation models, be sure to
use a propeller intended for counterclock-
wise rotation. These propellers are identi-
fied with the letter "L" after the size
indication on the propeller. Otherwise the
boat could move in the opposite direction
from that expected.
ECM00501
NOTICE
Make sure to use a new cotter pin and
bend the ends over securely. Otherwise,
the propeller could come off during opera-
tion and be lost.
1.
Apply Yamaha marine grease or a corro-
sion resistant grease to the propeller
shaft.
2.
Install the thrust washer, spacer (if
equipped), and propeller on the propeller
shaft. NOTICE: Make sure to install the
thrust washer before installing the
propeller. Otherwise, the lower case
and propeller boss could be damaged.
[ECM01881]
3.
Install the spacer, washer, and propeller
nut. Tighten the propeller nut to the spec-
ified torque.
73
F200C, FL200C, F225B, FL225B, F250A,
FL250A
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
F225C
7
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6
5
4 3
2
ZMU07549
6
5
4 3
ZMU07548
1
2
1
Advertisement
Table of Contents
