Canbus Connector Mapping - Dell Embedded Box PC 5000 Technical Manualbook
Hide thumbs
Also See for Embedded Box PC 5000:
- Service manual (115 pages) ,
- Installation and operation manual (10 pages)
Table of Contents
Advertisement
Features
10
DisplayPort one
11
HDMI port
12
CANbus port (optional)
13
VGA port
14
12-26V DC power port (barrel connector)
15
Audio ports (3)
16
+12-26V DC power connector
1 Connections made to these ports must use SELV circuits and the wire (26 AWG-18 AWG) must have Double Insulation (DI) or Reinforced Insulation (RI) to
protect it from all hazardous voltages. Torque the screws at 2.88 kg-cm (2.5 lb-in) to secure the wire to the connector.
CANbus connector mapping
Pin
1
2
3
4
5
Signal
NC
CAN_L
GND
NC
NC
NOTE: For more information about the display options,
see
Display
Options.
Connect a monitor or another DisplayPort enabled device.
Provides video and audio output.
NOTE: For more information about the display options,
see
Display
Options.
Connect a monitor or another HDMI‑in enabled device.
Provides video and audio output.
Connect to a CANbus port enabled device or dongles. For
more information, see
CANbus connector
Connect a monitor or another VGA enabled device. Provides
video output. For more information, see
mapping.
Connect a 12-26V DC power cable for supplying power to
your Embedded Box PC. For more information, see
DC power port (barrel
connector).
Connect a speaker, a headphone, a microphone, or a
headset (headphone and microphone combo).
NOTE: Connect the headset to the Line Out port.
Connect a 12-26V DC power connector for supplying power
to your Embedded Box PC. For more information, see
+12-26V DC power
connector.
Pin
6
7
8
9
mapping.
VGA connector
12-26V
Signal
NC
CAN_H
NC
NC
7
Advertisement
Table of Contents
